1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
SVH-120-Series
2-Way, NO, NC, 316 SS, High Flow Very High Pressure Solenoid Valves
Models In Stock
- Stainless Steel Construction
- ¼ or ½" Ports
- Pressures up to 10,000 psi (Depending on Model)
SVH-120-Series
From
$
1,269.01
Models In Stock
Product Overview
- Duty Cycle 100%
- Electrical Connection 1/2 in NPT female Conduit with Wire Leads
- Electrical Connection Note 1/2 NPT, 457 mm (18") leads
- Materials 316 Stainless Steel, PTFE, PEAK, Nitrile Rubber, FKM, 302 Stainless Steel,430 Stainless Steel, 303 Stainless Steel, Nylon
- Materials, Wetted 302 Stainless Steel, 316 Stainless Steel, 430 Stainless Steel, Buna-N (NBR), FKM, Nylon, PEAK, PTFE
- Media Compatibility Alcohols, Argon, Compatible Gases, Compatible Liquids, Nitrogen, Oils, Water
- Media Type N/A
- Orifice Size N/A
- Process Connection Type NPT Male
- Process Temperature, Max 121 °C
- Process Temperature, Min -37 °C
- Valve Type Pilot Operated
The new SVH-120 Series is a versatile, ¼ or ½" full port, high pressure, pilot operated, solenoid valve. The SVH-130 Series is a compact size, for where space is limited. The compact SVH-120 Series is ideal for flow control of high pressure air, water, compressed natural gas (CNG), hydrogen, nitrogen, and other gases or light liquids compatible with the materials of construction, and leverages this high pressure flow to its own advantage in operating effectively and efficiently.
The SVH-120 style valve is perfect for use in hydrogen dispensing tanks, commonly used in the refueling of fleet vehicles. It is also a used in many compressed natural gas applications. With available pressures to 10,000 psig there are a wide range of applications that include water, nitrogen and many other compatible liquids. This solenoid valve must be mounted with the solenoid upright and vertical.
Specifications
Materials Of Construction
Valve Body: 316 SS
Pistons: PAEK
O-Rings: Buna-N/FKM “-VT”/PTFE
Backing Rings: Buna-N/FKM “-VT”/PTFE
Piston Rings/Seal: PTFE/302 SS
Cartridge: 316 SS/430 SS
Pilot/Seal: 303 SS/PTFE
Spring: 302 SS
Plunger: 430 SS
Bonnet Retainer: 430 SS
Cartridge Gasket: Nylon
Fluid Temp Range: -37 to 121°C (-35 to 250°F), -26 to 204°C (-15 to 400°F) (-VT)
Shipping Weight: 1.8 Kg (4 lbs){SVH-121}, 3.2 Kg (7 lbs) {SVH-122}
Cv: 4.5
Port Connections: ¼ NPT (SVH-121), ½ NPT (SVH-122)
Electrical
Duty: Continuous
Connection: ½ NPT, 18" leads
Power: 10 watts, 22 watts (-XP)
A C Inrush: 1 amp @120 Vac, 2.5 amp @120V AC (-XP)
AC Holding: 0.1 amp @ 120 Vac, 0.2 amp @ 120 Vac -XP
Insulation: Class “F”, Class “H” -XP
Maximum Operating Pressure:
A C Voltage: 7,500 Psig, 10,000 psig -XP
DC Voltage: 3,600 PSIG, 7,200 psig -XP
Minimum Pressure: 100 psig
Read More
The SVH-120 style valve is perfect for use in hydrogen dispensing tanks, commonly used in the refueling of fleet vehicles. It is also a used in many compressed natural gas applications. With available pressures to 10,000 psig there are a wide range of applications that include water, nitrogen and many other compatible liquids. This solenoid valve must be mounted with the solenoid upright and vertical.
Specifications
Materials Of Construction
Valve Body: 316 SS
Pistons: PAEK
O-Rings: Buna-N/FKM “-VT”/PTFE
Backing Rings: Buna-N/FKM “-VT”/PTFE
Piston Rings/Seal: PTFE/302 SS
Cartridge: 316 SS/430 SS
Pilot/Seal: 303 SS/PTFE
Spring: 302 SS
Plunger: 430 SS
Bonnet Retainer: 430 SS
Cartridge Gasket: Nylon
Fluid Temp Range: -37 to 121°C (-35 to 250°F), -26 to 204°C (-15 to 400°F) (-VT)
Shipping Weight: 1.8 Kg (4 lbs){SVH-121}, 3.2 Kg (7 lbs) {SVH-122}
Cv: 4.5
Port Connections: ¼ NPT (SVH-121), ½ NPT (SVH-122)
Electrical
Duty: Continuous
Connection: ½ NPT, 18" leads
Power: 10 watts, 22 watts (-XP)
A C Inrush: 1 amp @120 Vac, 2.5 amp @120V AC (-XP)
AC Holding: 0.1 amp @ 120 Vac, 0.2 amp @ 120 Vac -XP
Insulation: Class “F”, Class “H” -XP
Maximum Operating Pressure:
A C Voltage: 7,500 Psig, 10,000 psig -XP
DC Voltage: 3,600 PSIG, 7,200 psig -XP
Minimum Pressure: 100 psig
PDFs & Manuals
