Welcome to our new website, found an issue or bug? Please report it here
OM-VIB-101-Logger
3-Axis USB Vibration/Acceleration Data Logger
Models In Stock
- Mountable Data Logger Uses Three Accelerometers to Precisely Measure Acceleration of Operating Equipment on X, Y and Z Axes
- Stores up to 327,600 Data Points in Flash Memory
- One Button Starts/Stops Data Logging Without a PC
- Plug-and-Play USB 2.0 Interface–No Need for Cables, Cradles or Docks
OM-VIB-101-Logger
From
$
205.96
Models In Stock
Product Overview
- Acceleration Range ± 16 g
- Battery Size and Type 3.6V Li-ion
- Calibration Accuracy Accelerometer : ±0.5 g
- Data Interface USB
- Frequency Response 0 to 60 Hz
- Height 54 mm
- Humidity Range 5 to 95% RH
- LED Indicators Red and Green LEDs Indicate Device Status (Recording, Not Recording, Low Battery, Memory Full)
- Length 113 mm
- Memory 327600 Data Points
- Memory Note 327,600 data points in 16 MB flash memory
- Millivolt Range N/A
- Number of Measurements 3
- Operating Temperature, Max 45 °C
- Operating Temperature, Min 0 °C
- Pressure, Max 0 psi
- Sampling Rate 20 Hz (20 updates/second)
- Sampling Rate Note 50 ms to 24 hours
- Software Windows XP SP3 / Vista / 7 and 8 (32 and 64 - bit)
- Supply Power Type Battery
- Weight 73.5 g
- Width 32.5 mm
The OM-VIB-101 is ideal for assessing the health and diagnosing performance problems of rotating machinery. Slight changes in the axial accelerations of a motor over time can reveal whether a motor is running efficiently and even indicate whether it may fail in the future. The OM-VIB-101 uses three components to collect and present vibration data:
1) Memory stick-sized USB data logger containing three precision accelerometers
2) Pedestal for mounting the data logger on an operating piece of equipment
3) Powerful Windows®-compatible graphics application. Once the logger has been dismounted, plugging it into a computer’s USB port automatically imports hours of vibration, motion and tilt data to the application.
1) Memory stick-sized USB data logger containing three precision accelerometers
2) Pedestal for mounting the data logger on an operating piece of equipment
3) Powerful Windows®-compatible graphics application. Once the logger has been dismounted, plugging it into a computer’s USB port automatically imports hours of vibration, motion and tilt data to the application.
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 1 out of
5
by
Giusi1 from
Lots of issues
The items works only when connected to a pc via usb
The twchnical stuff has been promising me a new set of instructions and i am still waiting
So far very bad review from my side
Regarda
Date published: 2017-04-18
Rated 1 out of
5
by
rph1 from
Horrible!
Spent a lot of time trying to get this thing to work. It would not work for more than a few minutes.
Had a online chat with the service department resulting in my returning the unit. Service Dept. testing the unit for a short while, while connected to the computer and had no problem. For this application, the unit will be attached to the equipment.
Note, I have several Omega temperature/humidity data loggers, which we have used successfully for several years.
Date published: 2017-12-27
Rated 1 out of
5
by
Tim M from
Too light to be a paperweight
This product is horrible. It does not do half of what is advertised (example is to set alerts). It is not very sensitive and doesn't communicate with computer half the time. You have to use a screwdriver remove the battery and reassemble in order to get communication back. All of the error messages in the software were clearly translated from another language as the translation is broken. Bottom line is I would highly recommend not purchasing.
Date published: 2017-05-01
Rated 2 out of
5
by
EngineerRobert from
Interface, Software and Instructions need work
It took 2 weeks to get it working at all on a time available basis. Omega had a non-windows 10 compatible version posted on the web at first. Very few newer laptops have a CD drive so the download verison is important. I can not get the unit to start recording with a button so I have to use the software to schdule a start time. The software is sloppy, spell check was obviously not used (Device is not spelled Deveice). Download is very slow, a full logger takes several minute to download. Memory is limited. For vibration I want to have a resolution that will give full amplitude and frequency which requires roughtly 10x the record rate of the vibrational frequency. At 250 ms i can only record 1 day. at 50 ms only a few hours. The instruction manual is not very helpful. I can not get the unit to record with zero as the centerline value even though I have "calibrated" it muliple times.
Date published: 2018-10-10
Rated 4 out of
5
by
Jclark from
Almost Perfect
Used the device several times since I purchased it had to learn the hard way that if you set in the parameters to start logging at a certain time but accidentally press the button before the timer and you get nothing unless you hook it back up to your computer.
There should be an option when you set the parameters to disable the button.
Date published: 2017-07-21
Rated 3 out of
5
by
Anonymous from
Good product with bad service!
The product was good. Only problem was the service.
Date published: 2021-02-15
Rated 3 out of
5
by
FriendlyNot4Me from
still a little large
Still a little too bulky for our operation. I'd like to see it in a more basic form with out the casing.
Date published: 2017-06-09
what windows operating system is this loggers software compatible with?
Thank you for connecting with Omega. Vibration/Acceleration Data Logger Software Version 3.0.2 is compatible with Windows XP/7/8/10.
Date published: 2020-09-28
What is the force range for the model? Will it handle +/-10G?
Thank you for your question. The range of the OM-VIB-101 is +/- 16 g.
Date published: 2020-09-28
An error ocurred while applying security settings. Administrator is not valid user or group. This could be a problem with the package, or a problem connecting to a connection and click "Retry", or "Cancel" to end the install
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2022-07-22
How long does it take to charge through USB? Also, what is the red LED light 'Alm" for?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2022-10-11
Is this waterproof?
Thank you for your question. The logger is not waterproof.
Date published: 2020-08-11
Dims without the mounting fixture? weight with the battery? I want to measure centrifugal acceleration up to 16g but it will be exposed to 2500g (5000rpm@3.5"). your OM dataloggers work in this condition but will this damage the accelerometer part?
Thank you for your question. Unfortunately, the logger will not work in this application.
Date published: 2021-10-25
What formats can the "Vibration/Acceleration Data Logger Software" export data in? Can the hardware unit be connected to a PC and visualize data in real-time?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-10-16
The device appears to be logging data correctly (based on the blinking LED). However when I open the software I cannot download the data from the sensor. When I plug the sensor in my computer it doesn't seem that the computer is installing a new device
Hello
More information may needed on this, please send request to das@omega.com
Date published: 2023-01-24