Welcome to our new website, found an issue or bug? Please report it here
LTUR-3022-Series
316 SS Fixed Length Standard-Type Tuning Fork Level Switch
Models In Stock
- Input voltage range of 20 to 250 (Vac / Vdc).
- No calibration or complex setting procedure
- High / Low fail safe modes
- Remote Self-Testing function to diagnostic connections
LTUR-3022-Series
From
$
542.69
Models In Stock
Product Overview
- Approvals CE, RoHS, UKCA
- Density, Max 0.7g/cm ³
- Electrical Connection 1/2 in NPT female Conduit with Screw Terminal block
- Enclosure Ratings IP65
- Materials Aluminum, 316 Stainless Steel
- Materials, Wetted 316 Stainless Steel
- Media Compatibility Oil, Solvents, Water
- Operating Pressure, Max 600 psi
- Operating Temperature, Min -40 °C
- Power Consumption 10 VA
- Probe Length 4 in
- Process Connection Size 1 in
- Process Connection Type NPT Male
- Process Temperature, Max 130 °C
- Process Temperature, Min -40 °C
- Sensitivity Switch selectable - HI/LO
- Supply Power Type AC/DC
- Supply Voltage 20 to 250 Vac/Vdc
- Switch Rating 5 A @ 250Vac/28Vdc
- Switch Type SPDT NO/NC, Selectable
- Time Delay 1 to 3 sec
- Vertical Load on Rod, Max 20 Nm
- Vibration 350 to 370 Hz
Description
The tuning fork level switch is a mechanical resonant device which is excited by piezoelectric (PZT) elements. When the measured medium comes into contact with the tuning fork, it will change the feedback resonant frequency due to the damping resonances between the exciting PZT and receiving PZT.By detecting the frequency and appropriately tuning the sensitivity of tuning fork level switch on measured material, such device can easily operate for monitoring the alarm level of measured material.
Specifications:
Housing Material: Aluminum
IP Protection: IP65
Fork Material: SUS316
Fork Length: 105mm
Mounting: 1” NPT
Electrical Connection: 1/2"NPTx2
Max. vertical load on rod: 177in.Lbs(20Nm)
Process pressure: -1~600PSI (40BAR)
Supply Voltage and Output: 20~250Vac/Vdc,50/60Hz, Relay SPDT 5A/250Vac / 28Vdc
Power consumption: 10VA
Ambient temperature: -40C~60C
Process temperature: -40C~130C
Signal output: Relay, SPDT, 5A/250Vac/ 28Vdc
Minimum material density sensed: Solid: >/= 0.07g/cm3, Liquid: ³0.7g/cm3
Time delay: 0.6 Second / Operate; 1~3 Seconds / Reset
Vibrating frequency: 350~370Hz
Selectable Fail-safe: Hi / Lo.
Selectable sensitivity: Hi / Lo.
Show Ratings & Reviews
Hi there, I'm looking for a flow switch in LPG application to be installed on a 4" and 3" pipe and failed closed (Safe), what model # you'd suggest in this case?
Thank you for your inquiry. Please send an e-mail to flow@omega.com with your requirements and application information and our Flow Engineers will help you select a model suitable for your process conditions.
Date published: 2020-04-07
RoHS 2015/863 - View Certificate
CE Approved
UKCA