Welcome to our new website, found an issue or bug? Please report it here
FLD-Air-Series
Air - Direct Read, Panel Mount Variable Area Flow Meters
Models In Stock
FLD-Air-Series
From
$
143.75
Models In Stock
Product Overview
- Accuracy ± 5 %
- Back Plate 1/8" thick white acrylics
- Media Compatibility Air
- Mounting Panel Mount
- Mounting Fittings In Contact With Fluids 316 stainless steel, Aluminum, black anodized
- Number of Tubes 1
- Operating Pressure, Max 200 psi
- Process Connection Size 1/8 in
- Process Connection Type NPT Female
- Process Temperature, Max 121 °C
- Repeatability ± 0.25%
- Scale Direct Read
- Turndown Ratio 10:1
Show Ratings & Reviews
Rated 5 out of
5
by
FakeSnake from
I got Flow Control...
Omega always has a great selection of products & technical data so you can find what you need...and this was no exception. The right flow range for the job.
Date published: 2018-12-12
Rated 5 out of
5
by
SLaudano from
Quality Product
Meets our needs as expected. Quality product and excellent delivery.
Date published: 2025-02-10
Rated 5 out of
5
by
IA INSTRUMENTS SAC JOSE U from
Rotameter Flow Meter Dwyer Omega FLDN3505C
Is a good product it flow meter Rotameter from Dwyer Omega
Date published: 2025-02-03
Rated 5 out of
5
by
Wm Ed from
Direct Read Flow Meter
Great flow meter and you cant beat the price. I have bought several of these over the years and they always perform well.
Date published: 2024-10-21
Rated 5 out of
5
by
Welders from
Wonderful product
Wonderful product with exact presision, also has an excellent duration
Date published: 2024-05-31
Rated 5 out of
5
by
Kevork from
Hydrogen Flowmeter
Thank you Omega for custom suppling me the Hydrogen Flow meter, which is not available on the market, in a very short time , even beating the estimated time, one again I can't thank you enough. Kevork
Date published: 2024-04-30
Rated 5 out of
5
by
Natalie Fike from
Flow Meter
Great product for measuring liquid or gas. Comes in handy.
Date published: 2024-04-15
For the product FLDN3305G, the readings are in STANDARD LPM?
Thank you for your inquiry. The FLDN3305G has a range of up to 120mL/min. The units on the scale will be in mL/min.
Date published: 2020-04-29
Where do I reed the ball on the FLDA3214G-NV flow meter. The top or the center?
Thank you for your inquiry about the rotameters. The Rule of Thumb is to read the flow rate at the highest and widest part of the float and in this case, a sphere will be the center.
Date published: 2023-08-15
Hi. Can I assume that all FLD series meters are volumetric, or is there an option to order them so that they are standardized?
Thank you for your inquiry. They are calibrated at standard conditions, yet, no options for a calibration certificate.
Date published: 2024-10-07
Ordered an FLDA3420C-NV rotameter. Per spec sheet it has a max flow of 10 L/min. But now see the website says the units are SCFM and the readings on the meter go to 10. Which is the correct measurement unit?
Thanks for your question?
The part number, FLDA3420C-NV, rota-meter with no valve has been confirmed to have a max flow capacity of 10 LPM.
Date published: 2019-07-15
Is the connection 1/8 pipe size? or 1/8'' Outer Diameter?
Thank you for your inquiry. The process connection is 1/8 inch NPT
Date published: 2024-11-20
Is there an option available that can be sanitized in place using peroxyacetic acid?
Thank you for your inquiry. If you would like to use the acid in question to clean, please consult a Chemical compatibility handbook to determine if the wetted materials are chemically compatible.
Date published: 2025-01-23
Certificate Traceable to NIST
Thank you for your inquiry for this rotameter. Unfortunately, there is no option for a NIST certificate for this series, you may consider the FL-3600, 3700, 3800, and 3900 series.
Date published: 2021-01-26
How do I read the flow meter / take the reading of FLDA3212ST model? Do I read the float at the top, middle or bottom? The model we got is FLDA3212ST
Thank you for your inquiry about the rotameters. The Rule of Thumb is the highest and widest part of the float.
Date published: 2023-03-11