UFM-DWG-Series

Clamp on Transit Time Ultrasonic Flow Meter For 2.5 in to 10 in Pipes

5.0

(2)

Models In Stock

Clamp-on, non-invasive Flow Meter
Bidirectional flow measurement system
Measures flow rate, total and velocity of water flow
Set up the meter through keypad interface or with SoloCUE® Flow Device Manager software

See Product Overview

UFM-DWG-Series

From ^$ 3,495.93

Models In Stock

Shop Models

6 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ± 1 %
Calibration Option Factory Calibrated
Certifications CE
Data Interface BACnet MS/TP, Modbus RTU, USB
Display Language English, French, German and Spanish selectable
Display Note Keypad: 4-button navigation, membrane keypad with domed tactile feedback Resolution: 128 × 64 pixel LED backlit graphical display; adjustable brightness and timeout
Display Type LED
Electrical Output 4 to 20 mA, Two Pulse, Frequency
Enclosure Ratings IP65
Form factor Pipe Remote mount
Keypad Yes
Materials 316 Stainless Steel, Polycarbonate
Measurement Type Transit Time
Number of Outputs 4
Operating Temperature, Max 60 °C
Operating Temperature, Min -20 °C
Output Detail Pulse / Frequency /Digital : Two outputs, each selectable as frequency, pulse, forward/reverse flow or alarm output; isolated open collector, 5-30V DC, 50 mA maximum, externally or internally sourced with pullup resistor Digital alarm output: configurable high or low Frequency output: 63 Hz-10 kHz maximum Pulse (totalizer) output: 100 Hz maximum output open collector, pulse width 5-500 ms programmable Analog Output: 0-20 mA and 4-20 mA drive up to 800 Ohms; minimum 16-bit resolution, isolated Open Collector Output: 5 to 30 Vdc, max. 50 mA externally or internally sourced
Pipe Size, Max 10 in
Pipe Size, Min 2.5 in
Process Temperature, Min -40 °C
Pulse Rates 100 Hz
Repeatability ±0.2%
Repeatability Note ±0.2% of reading
Reserved Type Standard
Software SoloCUE
Storage Temperature, Max 80 °C
Storage Temperature, Min -40 °C
Supply Power Type DC
Supply Voltage 9 to 28 Vdc
Velocity, Max 40 ft/s
Velocity, Min 0.1 ft/s

The TFX-500w transit time ultrasonic flow meter measures volumetric flow of clean water in pipes 10 in. or smaller. By clamping on the outside of the pipe, the ultrasonic meter installs without cutting or tapping the pipe.

APPLICATION

The TFX-500w meter is well suited for building automation, water distribution and wastewater collection in new and retrofit applications. In addition to having lower installation costs than an inline flow meter, the TFX-500w meter can be installed while the system continues to operate without interruption.
The TFX-500w meter is suitable for:

• Potable water
• Reclaimed water
• Chiller water
• Boiler feed water
• Make-up water
• Condenser water
• Condensate

OPERATION

Transit time flow meters use two transducers that function as both ultrasonic transmitters and receivers. The flow meters operate by alternately transmitting and receiving a frequency-modulated burst of sound energy between the two transducers. The burst is first transmitted in the direction of fluid flow and then against fluid flow. Since sound energy in a moving liquid is carried faster when it travels in the direction of fluid flow (downstream) than it does when it travels against fluid flow (upstream), a differential in the times of flight will occur. The sounds time-of-flight is accurately measured in both directions and the difference in time-of-flight calculated.

Transducers

Model	Construction	Cable Length	Pipe/Tubing Sizes
KZ (IP54), Standard pipe, Integrated rail	PBT glass filled, Ultem®, Nylon cord grip PVC cable jacket; † “40† ¦250 ° F († “40† ¦121 ° C)	100 ft (30 m) max	2.5† ¦10 in. (DN65† ¦DN250)
RZ (IP54), Standard pipe	PBT glass filled, Ultem®, Nylon cord grip PVC cable jacket; † “40† ¦250 ° F († “40† ¦121 ° C)	300 ft (90 m) max.	2.5† ¦10 in. (DN65† ¦DN250)
NZ (IP67), Standard pipe	CPVC, Ultem, Nylon cord grip Polyethylene cable jacket; † “40† ¦194 ° F († “40† ¦90 ° C)	300 ft (90 m) max	2.5† ¦10 in. (DN65† ¦DN250)