UFM-DQG-Series

Clamp on Ultrasonic Flow Meter/Data Logger For 2.5 in to 48 in Pipes

(0)

Reduced installation time and cost
Non-invasive, non-contact measurement
Continued operation during installation—no need to shut down the process
No pressure head loss

See Product Overview

UFM-DQG-Series

From ^$ 4,398.60

Shop Models

12 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ± 1 %
Calibration Option Factory Calibrated
Certifications CE
Data Interface BACnet MS/TP, Modbus RTU, USB
Display Language English
Display Note Keypad : 4-button navigation, keypad with tactile feedback; polyester film Display128 × 64 pixel LED backlit graphical display; adjustable brightness and timeout; polycarbonate window
Display Type LED
Electrical Connection 1/2 in NPT female Conduit with Poly Cable Glands
Electrical Output 4 to 20 mA, Two Pulse, Frequency
Enclosure Ratings IP67, NEMA 4
Form factor Pipe Remote mount
Keypad Yes
Materials PVC, CPVC, HDPE, PTFE, PDVF, Stainless Steel, Ductile Iron, Aluminum, Brass, Carbon Steel, Copper
Measurement Type Transit Time
Number of Digits 8
Number of Outputs 4
Operating Temperature, Max 60 °C
Operating Temperature, Min -20 °C
Output Detail 4-20 mA output:One 16-bit, isolated, max 800 Ohms, internal or external power Digital output:Two selectable pulse, alarm, flow direction, sink isolated open collector, 5-30V DC, max. 50 mA externally or internally sourced Frequency output: 50% duty cycle, 63-10k Hz maximum frequency Pulse (totalizer) output: 5 kHz max. output, open collector, pulse width 5-500 ms programmable Optional: Two dry contact output for alarm or flow direction 30V DC max., 5A max. (Ethernet not available with this option); Open Collector Output: 5 to 30 Vdc, max. 50 mA externally or internally sourced
Process Temperature, Min -40 °C
Pulse Rates 5 KHz
Relative Humidity 85% non condensing
Repeatability 0.002
Repeatability Note 0.2% above 1.5 ft/s
Software SoloCUE
Storage Temperature, Max 80 °C
Storage Temperature, Min -40 °C
Velocity, Max 40 ft/s
Velocity, Min 0.1 ft/s
Volumetric Flow Rate, Min 0 GPM

The TFX-5000 transit time ultrasonic flow meter measures volumetric flow and heating/cooling energy rates in clean liquids as well as those with small amounts of suspended solids or aeration, such as surface water or raw sewage.

TFX-5000 flow meter clamps onto the outside of pipes and do not contact the internal liquid.

APPLICATION

The TFX-5000 meter is available in a variety of configurations that permit the user to select a meter with features suitable to meet particular application requirements.
The TFX-5000 meter is suitable for:

- Water Delivery
- Sewage
- Cooling Water
- Water-glycol mixtures
- Alcohols
- Chemicals

OPERATION

Transit time flow meters measure the time difference between the travel time of an ultrasound wave going with the fluid flow and against the fluid flow. The time difference is used to calculate the velocity of the fluid traveling in a closed-pipe system. The transducers used in transit time measurements operate alternately as transmitters and receivers. Transit time measurements are bi-directional and are most effective for fluids that have low concentrations of suspended solids and are sonically conductive.

Model	Construction	Cable Length	Pipe/Tubing Sizes
RZ (IP54), Standard pipe	PBT glass filled, UltemÂ®, Nylon cord grip PVC cable jacket; â€“40â€¦250Â° F (â€“40â€¦121Â° C)	300 ft (90 m) max.	2.5â€¦10 in. (DN65â€¦DN250)
LZ (IP67) large pipe	CPVC, Ultem, Nylon cord grip Polyethylene cable jacket; â€“40â€¦194Â° F (â€“40â€¦90Â° C)	300 ft (90 m) max	8â€¦48 in. (DN200â€¦DN1200)
KZ (IP54), Standard pipe, Integrated rail	PBT glass filled, UltemÂ®, Nylon cord grip PVC cable jacket; â€“40â€¦250Â° F (â€“40â€¦121Â° C)	100 ft (30 m) max	2.5â€¦10 in. (DN65â€¦DN250) 2.5â€¦12 in. (DN65â€¦DN300)