1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
- Home
- See Industrial Heaters
- See Duct and Enclosure Heaters
- Compact Enclosure Fan Heaters from 60 to 230 W
We noticed you are from . Visit your local site for regional offers and live support.
FCH-FGC1
Compact Enclosure Fan Heaters from 60 to 230 W
Models In Stock
- High Power Output (60 to 230W) to Small Size
- Lightweight
- Simple Installation
- Pre-Wired
FCH-FGC1
From
$
217.74
Models In Stock
Product Overview
- Additional Features 1 Finger Guards at Outlet
- Air Flow rate 13.6 m³/h
- Applications General Purpose, Heating Equipment
- Cable Length 600 mm
- Cross-Section 42 x 42 mm
- Enclosure Ratings IP20
- Form factor DIN and outlet finger guard
- Wire Gauge 16 AWG
This range of fan heaters uses Positive Temperature Coefficient (PTC) ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a † œfan-only† mode for air circulation. The product has been designed, and approved, for build-in applications. It has a robust construction utilizing two anodized aluminum extrusions, coupled to a 40 mm (1.6") fan. The heating element is a PTC heater.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
ntk1019 from
Heater Fan Surprisingly Efficient!
We recently purchased the FCH-FGC1 and wow! Surprisingly Efficient!
Date published: 2017-03-15
Rated 2 out of
5
by
GSPV from
Too Expensive
The heater/fan unit wasn’t nearly enough product for the money.
Date published: 2023-09-29
- y_2025, m_5, d_22, h_5
- bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
- cp_1, bvpage1
- co_hasreviews, tv_0, tr_2
- loc_en_US, sid_FCH-FGC10022R, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
- clientName_omega
- bvseo_sdk, java_sdk, bvseo-4.0.0
- CLOUD, getReviews, 3ms
- REVIEWS, PRODUCT
What's the BTU output for the 12v 60w unit please?
Asked by: Steve5342
I’m looking at these heaters to place in outside battery box to keep my lithium batteries warm. In my area it gets to around 18 degrees as the low temperature. It can remain below freezing for 4-8 hrs.
Answered by: Steveo
Date published: 2022-10-08
How is it mounted? Would it work in a campervan?
Asked by: AngelaH
The FCH-FGC10022R is a compact fan heater for small enclosures. Typical application is to heat a small electrical enclosure to keep components from dropping below their operating temperature range. Larger areas or enclosures would require more power to heat. We have emailed you the user guide for detailed instructions. Thank you for connecting with Omega!
Answered by: Jane
Date published: 2021-04-26
How does this unit mount? I've got an enclosure being made for a Robot Tool with a camera that will need heat. The insides of the enclosure are already very close to the outer dimensions of this unit and I'd like to know how it mounts to be sure it fits
Asked by: CynertiaDoug
Please send your inquiry to heaters@omega.com and instructions can be provided.
Answered by: ApplicationEngineerANB
Date published: 2022-02-22
How long and wide?
Asked by: spark
Thanks for your question. The specifications are listed on the Datasheet (PDF), under the bullets, on the product page. Please contact our Tech Support if you have any further questions. https://assets.omega.com/pdf/process-heaters-and-coolers/enclosure-heaters/FCH-FGC1.pdf
Answered by: Jane
Date published: 2021-04-26
Can you pleas send me a user guide fpr Compact Enclosure Fan Heaters from 60 to 230W?
Asked by: davef
Please send the request to heaters@omega.com and one of the Applications Engineers can send you a manual.
Answered by: ApplicationEngineerANB
Date published: 2022-05-03
What is the sound level produced (i.e. db level) by a typical 100WATT heater/fan?
Asked by: pieranch
Unfortunately there is no readily available data on the sound level of the Heaters. You can send a request to heaters@omega.com and see if that can be researched.
Answered by: ApplicationEngineerANB
Date published: 2023-01-19
Is there a way to control the heating output of this unit? Can I change voltage input for heat control?
Asked by: Hubbies
Hi Hubbies,
Thank you for the inquiry. Best to use a thermostat with the heating circuit. For other questions please forward request to TEMP@OMEGA.COM.
Best regards
OMEGA
Answered by: NorwalkAE_RS
Date published: 2024-11-04
Can this heater be attached to a hose duct for use as a defroster and mounted remotely? If not do you have an inline heater for 2.5” duct?
Asked by: Jono
The Heater could have a tube of appropriate material attached and send heat through it to act as a defroster but Omega has not experimented to know how this should be configured. The Heater as long as it is powered correctly and in the recommended environment can be mounted remotely. Omega sells the AHF series duct heater which is 4" that could probably be reduced for your application.
Answered by: ApplicationEngineerANB
Date published: 2024-01-30
- y_2025, m_5, d_22, h_5CST
- bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
- cp_1, bvpage1
- co_hasquestionsanswers, tq_9
- loc_en_US, sid_FCH-FGC10022R, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
- clientName_omega
- bvseo_sdk, java_sdk, bvseo-4.0.0
- CLOUD, getContent, 7ms
- QUESTIONS, PRODUCT
RoHS 2015/863 - View Certificate
CE Approved
UL cULus Recognized