Welcome to our new website, found an issue or bug? Please report it here
Series-608
Differential Pressure Transmitter, 0.1 inH2O, 4-20 mA, NEMA 4X, FM Safe
- High accuracy at low pressure ranges provides exceptional measurement for ensuring tight-control and minimizing costly out of specification conditions
- Intrinsically safe for use in the specified hazardous locations meets specifications where pressure transmission and safety cannot be compromised
- NEMA 4X rated enclosure provides protection in harsh environments permitting outdoor monitoring or in areas where dust and particulate matter exists
Series-608
From
$
1,306.25
Product Overview
- Compensated Temperature, Max 71 °C
- Compensated Temperature, Min -18 °C
- Compliance FM
- Compliance Note FM approved intrinsically safe for use in Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; Class III, Div. 1 when wired with approved intrinsically safe barrier. Entity parameters: Vmax= 36 VDC; Imax= 250 mA; CI=12 nF; LI=0 mH
- Display Type N/A
- Electrical Connection 1/2 in NPT female Conduit with Screw Terminal block
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP65, NEMA Type 4X
- Long Term Stability ± 0.5% FS/year
- Loop Resistance 0 to 1045 Ω max
- Materials, Wetted Consult Factory
- Media Compatibility Air, Argon, Carbon dioxide, Helium, Nitrogen, Non-Corrosive Dry Gases
- Mounting Note Not Position Sensitive
- Number of Wires 2
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -28 °C
- Output Signal Current
- Pressure Type Differential
- Process Connection Size 1/4 in
- Process Connection Type NPT Female
- Proof Pressure Up to 15 psi
- Response Time 250 ms
- Span Adjustment Potentiometers
- Supply Power Type DC
- Supply Voltage 12 to 36 Vdc
- Zero Setting Adjustable Range Potentiometers
The Dwyer® Series 608 Differential Pressure Transmitters convert positive, negative (vacuum), or differential pressures of clean, dry air or other non-conductive, non-corrosive gases into a standard two wire, 4-20 mA output signal. The use of an ultra thin silicon diaphragm enables precision measurement of differential pressures as low as 0.1" of w.c. while withstanding high static working pressures up to 100 psig (6.89 bar). The Series 608 transmitters are FM approved intrinsically safe for use in the specified hazardous locations when used with an approved intrinsic safety barrier. The rugged NEMA 4X, stainless steel housing makes this transmitter ideal for use in industrial and process plant environments.
Calibration Option available under Accessories.
Product Applications
- Lab Fume Hood Control
- Clean Room Applications
- Flow Measurements & Controls
- Filter Monitoring
- Furnace Draft Measurement
- Process Control