Welcome to our new website, found an issue or bug? Please report it here
Series-616W
Differential Pressure Transmitter, ± 0.25% Accuracy, NEMA 4X, 4-20 mA Output
Models In Stock
- NEMA 4X rated enclosure provides protection in harsh environments permitting outdoor monitoring or in areas where dust and particulate matter exists
- Easy to read LCD display provides immediate local alerts allowing corrective action to be taken quicker to eliminate the problem from becoming widespread
- Zero and span controls provides easy calibration checks and shorter installation time to get device running and monitoring
Series-616W
From
$
462.00
Models In Stock
Product Overview
- Accuracy Note ± 0.25% FS @ 77°F (25°C), display accuracy ± 0.5%
- Compliance CE
- Electrical Connection Screw Terminal
- Enclosure Ratings IP66, NEMA Type 4X
- Long Term Stability ± 1% FS/year
- Materials, Wetted Consult Factory
- Media Compatibility Air, Argon, Carbon dioxide, Helium, Nitrogen, Non-Conductive Gases, Non-Corrosive Dry Gases
- Mounting Note Not Position Sensitive
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -20 °C
- Pressure Type Differential
- Process Connection Note Barbed, dual size to fit 1/8˝ and 3/16˝ (3.12 and 4.76 mm) ID rubber or vinyl tubing
- Process Connection Size 1/8 in, 3/16 in
- Process Connection Type Stepped Barb Fitting
- Span Adjustment Push Button
- Supply Power Type AC/DC
- Wire Gauge 26 to 16 AWG
- Zero Setting Adjustable Range Push button
Positive, negative and differential pressures can be measured within a full span accuracy of ±0.25 with the Series 616W Differential Pressure Transmitter. Units are enclosed in a polycarbonate case, rated NEMA 4X (IP66) and operate by sensing the pressure of air and compatible gases then sending a standard 4-20 mA output signal. Design enables operation in 2-wire current loops. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. The LCD display allows local indication of pressure.
NIST CALIBRATION available in Product Configurator.
Product Applications
- Dust collection
- Outdoor HVAC
- Roof-top equipment
Show Ratings & Reviews
Rated 1 out of
5
by
mitch58 from
Not the quality i'd expect from Dwyer.
These are junk. Out of 3 units purchased, one came DOA, and even after warrantee repair, didnt work properly, a second one failed after less than 3 weeks of operation.
Date published: 2024-05-21
Rated 5 out of
5
by
l goth from
Excellent shipping, excellent product.
This item came in fully functional and we had no problems.
Date published: 2024-01-19
Is this 616W-10B-LCD Instrument factory calibrated?
Mike, these will not ship with Factory calibration, that would be an extra adder.
For factory calibration you will need to add -FC and cost will be 37.95 USD
For NIST traceable calibration adder will be -NIST and cost will be 223.60 USD.
If you need a quote please email sales@dwyeromega.com
Date published: 2024-07-11