Welcome to our new website, found an issue or bug? Please report it here
DMD4059
Choose a Variant
Input Type
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $575.20 |
| 10-24 | $546.44 |
| 25-49 | $534.94 |
| 50-99 | $511.93 |
| 100+ | $500.42 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Additional Features 1 | Standard Voltage isolated |
| Adjustments | ±5% Via Multi-Turn Potentiometer |
| CMRR | 100 db min |
| Electrical Connection | Screw Terminal |
| Electrical Output | 0 to 25 mA |
| Enclosure Ratings | IP40 |
| Excitation Voltage | Selectable 0 to 10 Vdc |
| Height | 117 mm |
| Impedance Input | 200 kΩ typical |
| Input Range Note | Input Range: 100 to 10,000 Ω bridges @ 10 Vdc, drives up to four 350 Ω bridges @ 10 Vdc;Minimum: 0 to 5 mV range, 0.5 mV/V sensitivity;Maximum: 0 to 400 mV range, 40 mV/V sensitivity |
| Input Type | Voltage |
| Isolation | 1200 Vrms minimum, 3-way isolation, power to input, power to output and input to output |
| Length | 122 mm |
| Linearity | Output Linearity, Ripple and Noise: Better than ±0.1% of span, <10 mV rms ripple and noise |
| Mounting | DIN Rail 35 mm Standard |
| Number of Inputs | 1 |
| Offset | Zero Offset (Tare): ± 100% of span in 15 % increments |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | -10 °C |
| Output Detail | Output Ranges: Voltage (10 mA max): 0-1 to 0-10 Vdc Bipolar Voltage (10 mA max): ±5 or ±10 Vdc Current: 0-2 mA to 0-25 mA Compliance, Drive @ 20 mA: 20V, 1000 Ω drive;current output can be selectively wired for sink or source Function Test Button: Sets output to test level when pressed. Adjustable 0 to 100% of span via potentiometer. Factory default is approx 50% of span Maximum Output: 10 Vdc @ 120 mA |
| Output Ripple | Better than ±0.1% of span, <10 mV rms ripple and noise |
| Output Signal | Current, Voltage |
| Output Value | Process |
| Power Consumption | 2 to 5 W |
| Resistance Accuracy | Better than ±0.01% per 1 Ω change in leadwire resistance |
| Response Time | 70 ms typical |
| Sensor/Transmitter Power | Up to 4- 350 Ω bridges @ 10 Vdc |
| Stability | ±0.01% per °C, Thermal: Better than ±0.02% of span per °C |
| Supply Power Note | 80 to 265 Vac, 50/60 Hz or 85 to 300 Vdc, 2 W maximum |
| Supply Power Type | AC/DC |
| Supply Voltage | 80 to 265 Vac, 85 to 300 Vdc |
| Temperature Stability | ±0.01% per/°C; Better than ±0.02% of span per °C |
| Voltage Measurement Range | 0 to 400 mV |
| Voltage Output Range | 0 to 10 Vdc |
| Weight | 159 g |
| Width | 22.5 mm |
| Wire Gauge | 14 AWG |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
mason from
great component
This item works exactly like I need it to. No issues, arrived quickly.
Date published: 2024-08-26
Rated 5 out of
5
by
Janice from
The Brand you want to use.
Quick Friendly Service. Alway a pleasure working with Omega
Date published: 2023-05-26
Rated 5 out of
5
by
Rand from
Strain gage Signal Conditioner!
Excellent quality and quick service.. Exactly what we needed. Great follow up by Omega.
Date published: 2023-04-24
Rated 5 out of
5
by
Enoch G from
Great Product with Support
This signal conditioner has a wide range of variable inputs and outputs. It is slim on the din rail so not much space is taken up. Made in the US. Support is readily available as opposed to other similar product manufacturers.
Date published: 2023-02-08
Rated 3 out of
5
by
JoseB from
Strain Signal Conditioner
Seems decent. Simple instructions, and wiring diagram. Worried vibration will cause the zero drift.
Date published: 2022-09-26
Rated 2 out of
5
by
Jim Ogden from
Poor mechanical design
The zero and span pots are located well behind a paper thin escutcheon and are not centered behind the holes in the surface which makes them very difficult to find with a screw driver. The plastic spring mechanism for attaching to the DIN rail is very flimsy and does not hold the device securely.
Date published: 2021-08-10