Welcome to our new website, found an issue or bug? Please report it here
Series-16G-8G-4G
Dual Loop Temp/Process Controllers w/ RS-485 Modbus® for PID Control
- On/off, PID, fuzzy logic, or manual output control
- Constant, sloped, program (ramp/soak), or remote set-point control
- 2 primary control outputs, 2 secondary/alarm relay outputs, and RS-485 standard on all models
- Remote set-point, input retransmission, or event input functions available with optional hardware
Series-16G-8G-4G
From
$
185.25
Product Overview
- Accuracy ± 1.8°F + ± 0.3% of span
- Accuracy Note ± 1.8°F plus ± 0.3% of span (± 1°C plus ± 0.3% of span) at 77°F (25°C) after 20 minutes warm up
- Compliance CE, cULus
- Control Output SPST Relay
- Data Interface RS-485 Modbus ASCII/RTU
- Display Note Process value: 4 digit, 0.47˝ H (12 mm), orange LCD; Set point value: 4 digit, 0.47˝ H (12 mm), green LCD
- Display Type LCD
- Enclosure Ratings IP66
- Input Control Signal 0 to 20 mA
- Input Type Thermocouple, RTD, DC Voltage or DC Current
- Memory Backup Non-Volatile
- Number of Digits 4
- Operating Temperature, Max 122 °F
- Operating Temperature, Min 32 °F
- Output Type (B) Relay
- Power Consumption max 5 VA
- RTD Input Range JPt 100: -4 to 752°F; Pt 100: -328 to 1562°F; Ni 120: -112 to 572 °F; Cu 50: -58 to 302 °F
- Storage Temperature, Max 150 °F
- Storage Temperature, Min -42 °F
- Supply Power Note 100 to 240 VAC -20/+8%, 50/60 Hz; Optional 24 VDC, ± 10%
- Supply Power Type AC
- Supply Voltage 100 to 240 Vac
- Switch Rating 5 A @ 250 Vac
- Switch Type SPST
- Temperature Sensor Type RTD or Thermocouple
- Thermocouple Input Range Note Type K: -328 to 2372°F; Type J: -148 to 2192°F; Type T: -328 to 752°F; Type E: 32 to 1112°F; Type W: -328 to 2372°F; Type R: 32 to 3092°F; Type S: 32 to 3092°F; Type B: 212 to 3272°F; Type L: -328 to 1562°F; Type U: -328 to 932°F, Type TXK: -328 to 1472 °F
- Voltage Input Range 0 to 5 V, 0 to 10 V
- Weight 9 oz
The Series 16G, 8G, AND 4G Temperature/Process Loop Controllers allow for monitoring and control of temperature or process conditions. The controller features two independent control outputs for dual loop control using on/off, auto-tune or self-tune PID, fuzzy logic, or manual control methods. RS-485 interface is included with Modbus® communication protocol, for easy bench-top configuration or integration with a PLC or data control system.
Product Applications
- Oven control
- Packaging equipment
- Parts washers