Welcome to our new website, found an issue or bug? Please report it here
FL9004-DC
Choose a Variant
Process Connection Type
Switch Rating
Materials
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 5 % |
| Additional Features 1 | DC Relay |
| Design Type | Piston |
| Dim Across Flats | 1 1/2 in |
| Length | 8.25 in |
| Materials | Polysulfone |
| Materials, Wetted | Brass, Buna-N (NBR), Stainless Steel, Strontium Ferrite |
| Media Compatibility | Hydraulic Oil, Light Oil, Oil |
| Operating Pressure, Max | 325 psi |
| Particle Size, Max | 74 μm |
| Process Connection Size | 3/4 in |
| Process Connection Type | NPT Male |
| Process Temperature Note | Maximum Temperature: 121°C (250°F); relay rated to 70°C (158°F) |
| Process Temperature, Max | 121 °C |
| Relay Note | Alarm Relay: Latching relay circuit housed in a sealed polypropylene enclosure. Relay pulls in over 25% of span and drops out above and below that. Includes mating connector. Relay is field replaceable; rated 1 A @ 30 Vdc (-DC models), 0.5 @ 125 Vac (-AC models), resistive load. |
| Repeatability | ± 1% |
| Scale | Direct Read |
| Scale Media Calibration | Water |
| Setpoint | Adjustable 0 to 100% FS |
| Switch Rating | 1 A @ 30 Vdc |
| Water Flow, Max | 4 GPM |
| Water Flow, Min | 0.5 GPM |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews