1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
CDH221-CDH222
Economical Conductivity Meter Kit With Probe
Models In Stock
- Economical
- Easy to Operate
- Splash Proof Front
CDH221-CDH222
From
$
264.37
Models In Stock
Product Overview
- Accuracy Detail ±(3% FS +1d)
- Additional Features 1 Sensor Included
- Battery Size and Type Alkaline 9V
- Cable Length 1.06 m
- Display Size 51 x 32 mm (2.01 x 1.26 in)
- Display Size Note 51 x 32 mm (2.00 x 1.25") LCD, 21.5 mm (0.8") digits
- Display Type LCD
- Dissolved Oxygen Range N/A
- Electrical Connection 4-pin probe connector
- Height 200 mm
- Humidity Range 0 to 80% RH
- Length 30 mm
- Measurement Type Conductivity
- Memory Yes
- Memory Card N/A
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- ORP Measurement Range N/A
- PH Measurement Range N/A
- Probe Diameter 22 mm
- Probe Length 120 mm
- Resolution Note Conductivity Resolution: 0.001 ms
- Salinity Range N/A
- Salt Range N/A
- Sampling Time 0.4 sec
- Sensor Temperature, Max 60 °C
- Sensor Temperature, Min 0 °C
- Temperature Compensation 0 to 50 °C
- Total Dissolved Solids Range N/A
- Weight 270 g
- Width 68 mm
The CDH221 is ideal for quality control, agricultural industry, water conditioning, beverage, fish hatcheries, laboratory, universities and many other Industrial applications. These microprocessor based digital meters are rugged, portable units which are able to recognize and compensate for electrode offset and slope. Overload indication and Data Hold are standard.
PDFs & Manuals
Show Ratings & Reviews
I am looking for a meter to sense moisture and/or water in a fuel tank. Would this sense water that would gather at the bottom of a fuel tanks? I would then want to pump the water out and have the sensor shut the pump off once gasoline is sensed.
Thank you for your inquiry on this product. A conductivity probe with a transmitter would be better to detect or sense water since it is conductive compared to gasoline. You may look at the DPU91 conductivity transmitter with the required module, DPU90-C, and a probe to be able to sense water at the bottom of the tank.
Date published: 2020-07-29