Welcome to our new website, found an issue or bug? Please report it here
FL6100A-6300A-Series
In-line Flowmeters Capacity: 0.2 to 15 GPM for Water or Oil
Models In Stock
- ± 2% Full Scale Accuracy
- 1% Repeatability
- Direct Readings for Oil or Water
- Good Viscosity Stability
FL6100A-6300A-Series
From
$
320.37
Models In Stock
Product Overview
- Accuracy ± 2 %, ± 5% with transitional flow
- Additional Features 1 Dual Scale (GPM/LPM)
- Diameter 2.4 in
- Dimensions Note 2.4 x 2.1 in
- Length 6.6 in
- Operating Pressure, Max 3500 psi
- Process Connection Size 1/2 in
- Process Connection Type NPT Female
- Process Temperature, Max 116 °C
- Repeatability ± 1%
- Scale Direct Read
- Valve Included false
- Weight 1.25 lb
The FL-6000A Series of general purpose flowmeters is designed to provide economical, accurate flow rate indication for oil and water. These industrial flowmeters utilize a spring-and-piston type assembly, which enables them to be mounted in any position and gives immunity to changes in viscosity. FL-6000A meters can be used in severe environments at up to 241.3 bar (3500 psig) and 116°C (240°F).
SPECIFICATIONS
Accuracy: ± 2% FS
Repeatability: ± 1%
Connection: 1/2 FNPT
Dimensions: 60.96 x 53.34 mm (2.4 x 2.1") for 116°C (240°F) units
Length: 168 mm (6.6") for all units
Maximum Pressure: 241.3 bar (3500 psig)
Maximum Temperature: Standard: 116°C (240°F); Optional: 204°C (400°F)
Shipping Weight:
Oil: 0.57 kg (1.25 lb)
Water: 1.18 kg (2.60 lb)
Wetted Parts: 302 SS (oil units) or 302 SS spring (water units), FKM O-rings, polyphenylene sulfide/ceramic magnetic. Oil units have aluminum body, water units have brass body.
SPECIFICATIONS
Accuracy: ± 2% FS
Repeatability: ± 1%
Connection: 1/2 FNPT
Dimensions: 60.96 x 53.34 mm (2.4 x 2.1") for 116°C (240°F) units
Length: 168 mm (6.6") for all units
Maximum Pressure: 241.3 bar (3500 psig)
Maximum Temperature: Standard: 116°C (240°F); Optional: 204°C (400°F)
Shipping Weight:
Oil: 0.57 kg (1.25 lb)
Water: 1.18 kg (2.60 lb)
Wetted Parts: 302 SS (oil units) or 302 SS spring (water units), FKM O-rings, polyphenylene sulfide/ceramic magnetic. Oil units have aluminum body, water units have brass body.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Spearsreman from
Always happy with purchase
We use these to test Carbonators for Soda Fountains. They are always accurate.
Date published: 2017-08-12
on 20 PSI mineral oil, whats the expected pressure drop, 3 gpm flow
Pressure drop chart for this flow meter on the link below.
https://assets.omega.com/pdf/test-and-measurement-equipment/flow/variable-area-flow-meters/FL6100A_6300A.pdf
Date published: 2020-07-24
Will these be damaged if you put a 5GPM and 15GPM in series to get better low and high range?
Thank you for your inquiry. It should be good and you must have sufficient straight run upstream and downstream between the two flow meters so that they will measure a Laminar flow, not turbulence.
Date published: 2024-11-07