Welcome to our new website, found an issue or bug? Please report it here
IEF-GB-PG-COM
10-36"PIPE 1"MBSPT PG16 COM
Choose a Variant
Data Interface
Electrical Connection
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 % |
| Accuracy Note | Standard accuracy > 10 to 36˝ (250 to 900 mm) pipe; 1% FS, High accuracy units: ± 0.5% of reading at calibrated velocity; ± 1% of reading from 2 to 20 ft/s (0.6 to 6 m/s); ± 0.02 ft/s (± 0.006 m/s) at < 2 ft/s (0.6 m/s); Standard accuracy units: ± 1% FS |
| Baud Rate | 9600 to 115200 |
| Compliance | BTL, CE |
| Conductivity | > 20 µS/cm |
| Control Output | Alarm |
| Data Interface | BACnet, Modbus |
| Device Load | 1/8 Unit |
| Display Range | 0 to 100% Glycol Display Selectable |
| Display Type | N/A |
| Electrical Connection | 1/2 in NPT female Conduit with Screw Terminal block |
| Enclosure Ratings | IP68, NEMA Type 6P |
| Linear Flow Rate, Max | 20 ft/s |
| Linear Flow Rate, Min | 0 ft/s |
| Materials | Aluminum |
| Materials, Wetted | Polymer, Silicon, Stainless Steel |
| Media Compatibility | Acid Solutions, Conductive Liquids, Saltwater |
| Operating Temperature, Max | 160 °F |
| Operating Temperature, Min | -20 °F |
| Output Detail | (1) Analog: 4-20 mA, 0-5 V, 0-10 V or 2-10 V (display selectable); (1) Pulse/Frequency: 0-15 V peak pulse, 0 to 500 Hz or scalable pulse output (display selectable); (2) Alarm: (1) Empty pipe detection or minimum/maximum velocity, (display selectable); (1) Reverse flow output indication |
| Output Signal | Current, Voltage, DC Pulse |
| Pipe Size, Max | 36 in |
| Pipe Size, Min | 10 in |
| Pressure Drop Note | < 0.1 psi at 12 ft/s in 4" (101.6 mm) and Larger Pipe |
| Pressure Drop, Max | 0.1 psi |
| Pressure Limits | Up to 400 psi |
| Process Connection Size | 1 in |
| Process Connection Type | BSPT Male |
| Process Temperature, Max | 250 °F |
| Process Temperature, Min | 15 °F |
| Storage Temperature, Max | 185 °F |
| Storage Temperature, Min | -40 °F |
| Straight Run Requirements | >10 Diameter Upstream, >5 Diameter Downstream |
| Supply Power Type | AC/DC |
| Supply Voltage | 12 to 42.4 Vdc, 0.25 A @ 24 Vdc; 12 to 36 Vac |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews