OS212

Fixed Infrared Temperature Sensor w/ adjustable emissivity and optional display

0.0

(0)

Temperature Range -20 to 500°C (-4 to 932ºF)
2-Wire 4 to 20 mA Output Proportional to Target Temperature
4 to 20 mA Input to Control Emissivity Setting
Optional Manual Emissivity Adjuster (Model No. OS210-PT)

See Product Overview

OS212

From ^$ 218.01

Shop Models

15 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ± 1 %
Accuracy Detail ± 1% of reading or ± 1ºC whichever is greater
Cable Length 3.3 ft
Cable Length Note 1 m (3.3') (included) longer lengths available to order
Display No
Emissivity, Max 1
Emissivity, Min 0.2
Emissivity Note 0.2 to 1.0 via 4 to 20 mA input
Enclosure Ratings IP65
Field of view 2:1
Housing Material Stainless Steel
Impedance 900 Ω
Operating Temperature, Max 70 °C
Operating Temperature, Min 0 °C
Output Signal Current
Process Temperature, Min 0 °C
Relative Humidity, Max 0.95
Relative Humidity Note 95% max non-condensing
Repeatability ± 0.5%
Repeatability Note ± 0.5% of reading or ± 0.5ºC whichever is greater
Response Time 240 ms
Response Time Note 240 mS (90% response)
Sensing head Mounting 16 mm
Sensor Voltage 6 Vdc
Spectral Response, Max 14 μm
Spectral Response, Min 8 μm
Supply Voltage 24 to 28 Vdc
Temperature Range MT-Medium
Weight 95 g
Weight Note 95 g (3.4 oz) with cable

The OMEGA Infrared Series is a range of high quality, low cost, compact sensors which measure the temperature of inaccessible or moving objects and materials. They measure temperatures from -20 to 500°C (-4 to 932ºF), accurately and consistently, with an outstanding response time of 240 mS. OMEGA sensors transmit the target temperature as a 4 to 20 mA output and offer a simple solution for most non-contact temperature measurement applications. The sensor’s emissivity setting can be adjusted from 0.2 to 1.0 to cope with different target materials and is controlled by a 4 to 20 mA input. This gives the opportunity to adjust the emissivity setting automatically from a programmable logic controller (PLC). Alternatively the emissivity setting can be adjusted manually using the OS210-PT. If the 4 to 20 mA input is left open or short-circuit the emissivity setting defaults to 0.95. Refer to accessory chart on J-3 for NIST calibration ordering information.

Specification
Infrared Sensor Output: 4 to 20 mA
Accuracy: ± 1% of reading or ± 1°C whichever is greater
Repeatability: ± 0.5% of reading or ± 0.5°C whichever is greater
Emissivity: 0.2 to 1.0 via 4 to 20 mA input
Response Time t90: 240 mS (90% response)
Spectral Range: 8 to 14 µm
Supply Voltage: 24 Vdc (28 Vdc max)
Min Sensor Voltage: 6 Vdc
Max Loop Impedance: 900 Ω (4 to 20 mA output)
Input Impedance: 50 Ω Mechanical
Construction: Stainless Steel
Dimensions: 103 L x 18 mm D (4.05 x 0.71")
Thread Mounting: M16 x 1 mm pitch
Cable Length: 1 m (3.3') longer lengths available to order
Weight: 95 g (3.4 oz) with cable
Environmental Rating: IP65
Ambient Temperature Range: 0 to 70°C (32 to 158°F)
Relative Humidity: 95% max non-condensing
Tune Emissivity Adjuster Specifications (OS210-PT)
Output: 4 to 20 mA
Supply Voltage: 24 Vdc (13V to 28 Vdc)
Display Format: 3.5 digit LCD
Display Units:
Emissivity: 0.2 to 1.0
Current: 4 to 20 mA
Adjustment: Pushbuttons (raise/lower/set) Mechanical
Construction: Polycarbonate with gasket, transparent lid (PC) and quick release screws
Mounting: Surface
Dimensions: 65 H x 50 W x 35 mm D (2.56 x 1.97 x 1.38")
Weight: 72 g (2.5 oz) Environmental
Rating: IP65
Ambient Temperature Range: 0 to 70°C (312 to 158°F)
Relative Humidity: 95% max non-condensing

PDFs & Manuals

OS212_spec OS212 View More

View Less

Compliance