Welcome to our new website, found an issue or bug? Please report it here
Series-636
Fixed Range Pressure Transmitter, SS, ± 0.30% Accuracy, Explosion-Proof
- Long service life and lower cost to maintain reduces total cost of ownership
- Explosion-proof housing for use in applications where protection of process and personnel is needed
Series-636
From
$
1,024.25
Product Overview
- Accuracy ± 0.3 %
- Accuracy Note ± 0.30% of calibrated span including linearity hysteresis and repeatability (BFSL) at 25°C (77°F) and 12 VDC excitation
- Compensated Temperature, Max 180 °F
- Compensated Temperature, Min -20 °F
- Compliance CSA, FM
- Compliance Note FM and CSA approved explosion-proof for Class I, Division 1, Groups B, C, and D, Class II Groups E, F, and G Class III
- Electrical Connection 3/4 in NPT female Conduit with Cable
- Enclosure Ratings IP56, NEMA Type 4
- Fill Fluid DC 200 silicone oil
- Loop Resistance 900 Ω max @ 30 V
- Materials, Wetted 316L Stainless Steel
- Media Compatibility Air, Gases, Nitrogen, Oil, Oxygen, Solvents, Water
- Operating Temperature, Max 140 °F
- Operating Temperature, Min -40 °F
- Output Detail 4 to 20 mA DC, limited to 30 mA DC
- Output Signal Current
- Pressure Type Gauge
- Process Connection Size 1/2 in
- Process Connection Type NPT Female
- Process Temperature, Max 212 °F
- Process Temperature, Min -40 °F
- Proof Pressure Up to 45 psi
- Span Adjustment ± 0.16 mA
- Stability ± 0.5% of upper range limit for six months
- Supply Power Note 12-30 VDC (636), 8-14 VDC (636LP), reverse polarity protection
- Supply Power Type DC
- Supply Voltage 12 to 30 Vdc
- Thermal Effects ± 2.0%/50°F (includes zero and span). Between -20 and 180°F (-29 and 82°C). ± 2.0% per 50°F (28°C).
- Weight 374 g
- Wire Gauge 22 AWG
- Zero Setting Adjustable Range ± 0.32 mA
The Series 636 Fixed Range Pressure Transmitter is a low cost, fixed range, stainless steel transmitter with ±0.30% accuracy. It is designed to continuously measure pressure for years in even the toughest environmental and media conditions. Transmitters are explosion-proof, (FM approved) and meet NACE standards for off-shore applications.
Calibration Option available under Accessories.
Product Applications
- Off-shore
- Process applications