1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
LR41
Flanged Radar Level Transmitter for Solids (Moderate Dust)
Models In Stock
- Rugged 316L stainless steel antenna and process mount
- Configuration via push button display or HART communicator
- Gimbal flange for easy positioning with the angle of repose
- Antenna air-purge for use with significant dust conditions
LR41
From
$
4,060.66
Models In Stock
Product Overview
- Accuracy ± 15 mm
- Air Purge Fitting 1/4 in (6.3mm) I.D. tubing
- Antenna Diameter 4 in
- Antenna Length 11.34 in
- Approvals CE, RoHS, FCC
- Approvals Note ATEX IIG Ex ia II C T6...T3 Ga IEC Ex ia IIC T6...T3 Ga CSA Class I, Div 1, Groups A, B, C & D; Class II, Div 1, Groups E, F & G; (T6... T3); Class I Zone 0 AEx ia IIC (T6... T3) Ga & Zone 20 AEx ia IIIC (T76°C to T146°C) Da; Ex ia IIC (T6...T3) Ga & Ex ia IIIC (T76°C to T146°C) Ga
- Bar Graph Percent of Span
- Beam Angle 8°
- Configuration Push Button, HART 7
- Deadband 12 in
- Display and Indications Echo Signal Curve
- Display Measuring Units ft, m
- Display Type LCD
- Electrical Connection 1/2 in NPT
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP67, NEMA Type 6
- Flange Thickness 0.45 in
- Frequency 26 GHz
- Materials 316 Stainless Steel, Polycarbonate
- Measuring Range, Min 1 ft
- Memory Non-Volatile
- Number of Wires 2
- Operating Pressure, Max 14.69 psi
- Power Consumption 22.5 mA
- Probe Type 4" Horn with Dust Shield Antenna
- Process Connection Size 4 in
- Process Connection Type Gimbal Flange
- Process Temperature, Max 400 °C
- Process Temperature, Min -40 °C
- Signal fail-safe 3.9 mA, 20.5 mA, 22 mA
- Signal invert 4 to 20 mA, 20 to 4 mA
- Storage Temperature, Max 80 °C
- Storage Temperature, Min -40 °C
- Supply Voltage 21.6 to 26.4 Vdc
- Tank Type Any
- Temperature Compensation Automatic
The intrinsically safe 26 GHz. pulse radar transmitter provides continuous level measurement up to 229.7 (70m) with a 4-20 mA analog and HART digital signal output, and is configured via its integral push button display module or HART communicator. The non-contact solids level sensor is intended for dry solid media including aggregates, grains, pellets, powders and building materials. Select this sensor for challenging process conditions with moderate to significant dust, and installation with an adjustable gimbal flange or mounting bracket. Typical applications include silos, stockpiles, transfer stations and crushers.
