Series-MPC

Flexible Pump Controller for Level Control – 1/4 DIN, Use with Transmitters

(0)

See Product Overview

Series-MPC

From ^$ 761.75

Shop Models

3 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ± 0.25 %
Accuracy Note ± 0.25% of span, ± 1 least significant digit
Compliance cULus
Control Mode On/Off, Reverse/Direct Acting
Current Measurement Range 4 to 20 mA
Display Note Two 4-digit, 7 segment 0.56˝ high LED’s
Display Resolution 1 Count
Display Type LED
Enclosure Ratings IP66, UL Type 4X
Impedance Current: 10 Ω/Voltage: 100 kΩ
Input Type Current, Voltage
Isolation 24 Vdc @ 50 mA, Regulated
Memory Backup Non-Volatile
Operating Temperature, Max 131 °F
Operating Temperature, Min 14 °F
Power Consumption 7.5 VA
Relative Humidity 0 to 90% Non-Condensing
Relative Humidity Note 14 to 131°F/0 to 90% up to 104°F (40°C) Non-Condensing, 10 to 50% at 131°F (55°C) Non-Condensing
Seal Failure Moisture Sensor: Power: 2.5 Vdc; Search Current: 3 µA; Resolution: 10k to 500kΩ in 10kΩ steps
Supply Power Note 100-240 Vac nominal, +10%-15%, 50 to 400 Hz, single phase; 132 to 240 Vdc nominal, +10%-15%.
Supply Power Type AC
Supply Voltage 100 to 240 Vac
Switch Note Control relays: SPDT, rated 10 A @ 240 VAC res., 1/4 hp @ 120 VAC, 1/3 hp @ 240 VAC; Alarm relays: SPST, 3 A @ 240 VAC res., 1/10 hp @ 120 VAC.
Switch Rating Control Relays: SPDT, rated 10 A @ 240 Vac, 1/4 hp @ 120 Vac, 1/3 hp @ 240 Vac; Alarm Relays: SPST, 3 A @ 240 Vac, 1/10 hp @ 120 Vac
Switch Type SPDT, SPST
Voltage Measurement Range 0 to 10 Vdc
Weight 16 oz

The Series MPC Pump Controller provides versatile level control in a standard 1/4 DIN package. Designed for use with almost any style level transmitter the unit displays the present level and main set point value. Incorporated in the MPC is programmable level differential for on/off control of one or two pumps, valves, or other devices through two SPDT relays.