1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
Series-MTL5541
Galvanic Barrier, DIN Rail Mount, Plug-In, for Dwyer® Hazardous Areas
- Easy snap-in installation for most DIN rails
- Safe to use in hazardous locations
Series-MTL5541
From
$
1,154.75
Product Overview
- Accuracy ± 15 µA
- Applications Fluid Measurement and Control, Industrial and Manufacturing
- Compliance FM, UL
- Current Sink, Max 600 Ω max
- Electrical Safety Vo= 28 V Io= 93 mA Po= 651mW Um= 253 RMS or DC. Weight: 5.3 oz (150 g)
- Input Control Signal 16.2 Vdc
- Isolation 250 V RMS, tested at 1500 V RMS minimum, between safe-area and hazardous-area terminals; 50 V between safe-area circuits and power supply
- LED Indicators Green: Power indication
- Load Resistance 0 to 360Ω @ 24 mA / 0 to 450Ω @ 20 mA
- Mounting T-section 35 mm DIN rail to EN 50022
- Operating Temperature, Max 140 °F
- Operating Temperature, Min -6 °F
- Output Detail Signal range: 4-20 mA; Under/over-range: 0-24 mA
- Output Resistance >1 MΩ
- Output Signal Current
- Power Consumption 1 W
- Relative Humidity 5 to 95% RH
- Response Time 50 µs
- Response Time Note Settles to within 10% of final value within 50 µs
- Storage Temperature, Max 176 °F
- Storage Temperature, Min -40 °F
- Supply Power Type DC
- Supply Voltage 20 to 35 Vdc
- Temperature Drift < 0.8µA/°C
- Terminal block up to 2.5 mm²
- Weight 5.3 oz
The Series MTL5541 Galvanic Barrier provides intrinsically safe isolation for communication with Dwyer® transmitters approved for use in hazardous areas. This galvanic barrier eliminates the need for a high integrity earth ground required when using shunt type diode type safety barriers. DIN rail mounting and plug-in signal and power connectors simplify installation and maintenance.
Product Applications
- Electrically isolates pressure and level transmitters from unregulated circuits for intrinsically safe applications
PDFs & Manuals