Welcome to our new website, found an issue or bug? Please report it here
CL532-Calibrator
Handheld 4 to 20 mA Current Loop Calibrator with 24 V Loop Power
CL532-Calibrator
From
$
2,503.81
Product Overview
- 2-Wire Transmitter Simulate Adjust loop current from 0 to 24 mA or -25 to 125% when powered by an external supply; LOW SUPPLY flashes to indicate a misconnection.
- Accuracy ± 0.012 %
- Accuracy Note ±0.012% rdg + 0.004 mA
- Battery life 18hr
- Battery Size and Type Alkaline 9V
- Electrical Connection Alligator Clips
- Height 180 mm
- Lead Length 610 mm
- Length 56 mm
- Loop Supply Limits 2 to 60 Vdc; Drive Capability: 1200 Ω at 20 mA for life of battery; Burden: <2V at 20 mA
- Measuring Range Read Current: Read 0 to 24 mA or -25 to 125%; CURRENT LIMITED flashes at >24 mA, protecting devices in the loop.; Read DC Voltage: Read 0 to 60 Vdc with 2x overrange ability and flashing OVERRANGE indicator; Power Measure: Power the loop and read 0 to 24 mA or -25 to 125%; CURRENT LIMITED flashes at >24 mA, protecting devices in the loop.
- Miscellaneous EZ-Check Switch: Gives instant access to 4 and 20 mA or other user-set span limits; in read modes, he EZ-Check switch provides a max/min log of reading; EZ-Step Button: Allows one-handed stepping up and down the span in 6 different step sizes; Adjusts output by 0.001 mA (0.01%); EZ-Dial Knob: push and turn for 100x faster adjustment—by 0.100 mA (1.00%)
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -20 °C
- Over-Voltage Protection 120 Vrms for 30 seconds, 240 Vrms for 15 seconds
- Overcurrent Protection 24 mA DC
- Relative Humidity 10% ≤RH ≤90% [0 to 35°C (32 to 95°F)], non-condensing; 10% ≤RH ≤70% [35 to 60°C (95 to 140°F)], non-condensing
- Source Current Source 0 to 24 mA or -25 to 125% into ≤1200 Ω; a flashing HIGH Ω indicator appears if improperly connected
- Storage Temperature, Max 60 °C
- Storage Temperature, Min -30 °C
- Temperature Effect ±50 ppm/°C
- Weight 326 g
- Width 84 mm
The CL530 builds on OMEGA’s 30 years of calibration experience. The user can check, calibrate, and troubleshoot 4 to 20 mA process control loops with this easy-to-use instrument.
The CL532 has all the features of the CL530, plus it will read up to 30 Vdc and source up to 24 Vdc.
The CL532 has all the features of the CL530, plus it will read up to 30 Vdc and source up to 24 Vdc.
PDFs & Manuals
