Welcome to our new website, found an issue or bug? Please report it here
IP510
Heavy Duty Current I/P or Voltage E/P to Pressure Converter
Models In Stock
- Hazardous Locations and Intrinsically Safe Ratings
- NEMA 4X (IP65)
- 0.1% Accuracy Typical
- Closed Loop Pressure Feedback Control
IP510
From
$
811.04
Models In Stock
Product Overview
- Accuracy ± 0.1 %
- Accuracy Note ±0.25% of output span
- Ambient Temperature Effect, Max ±0.022% of nominal span per ºF
- Approvals FM, CSA
- Electrical Connection 1/2 in NPT Female Conduit
- Enclosure Ratings IP65, NEMA Type 4X
- Hazardous Classification Vmax = 30 Vdc, Imax = 100 mA, Ci = 0 µF, Li = 0 mH T4 Max. Ambient 70°C. Voc and Isc of a barrier shall not exceed Vmax and Imax of the transducer. (Li + wiring) and (Ci + Cwiring) shall not exceed La and Ca of a barrier. A barrier is not necessary when the transducer is in any of these locations.
- Hysteresis ±0.1%
- Impedance 6000 Ω
- Input Control Signal N/A
- Loop Voltage Drop Note Less than 10 Vdc drop at 20 mA Less than 10 Vdc drop at 50 mA
- Material Construction Option CSA Approved and FM Approved
- Media Compatibility Air
- Operating Temperature, Max 71 °C
- Operating Temperature, Min -29 °C
- Process Connection Size 1/4 in
- Process Connection Type NPT Female
- Repeatability ±0.01%
- Repeatability Note ±0.10% of output span
- Span, Max 0.00013
- Span Note 0.013% of calibrated span per ºF, 0.022% of calibrated span per ºF
- Storage Temperature, Max 93 °C
- Storage Temperature, Min -40 °C
- Supply Power Note Supply Voltage, E/P Transducer: Intrinsically Safe/Non-Incendive: 9 to 28 Vdc, less than 20 mA General Purpose: 9 to 40 Vdc, less than 20 mA
- Supply Pressure, Max 100 psi
- Supply Pressure Sensitivity No effect
- Supply Voltage 9 to 40 Vdc
- Total Air Consumption 0.07 SCFM
- Total Air Consumption Note 0.07 SCFM (2 LPM) maximum
- Vibration Less than 0.5% of span per 1 g 5 to 2000 Hz, 3 g maximum, 3 axes
The IP510/EP510 Series are a patented family of electro-pneumatic instruments that are used to reduce a pneumatic supply pressure to a regulated output pressure which is directly proportional to a two-wire current or three-wire voltage input. This design incorporates closed loop sensing of the output pressure to achieve excellent accuracy and vibration stability. They also feature a unique damping circuit which can be adjusted to prevent overshoot and actuator hunting. Model selection includes General purpose NEMA 1, and Water-tight/Corrosion Resistant NEMA 4X (IP65). All models carry Hazardous Locations and intrinsically safe ratings.
SPECIFICATIONS
Accuracy:
Typical: ±0.1% of output span
Max: ±0.25% of output span
Hysteresis:
Typical: ±0.01% of output span
Max: ±0.10% of output span
Deadband: No effect
Repeatability:
Typical: ±0.01% of output span
Max: ±0.10% of output span
Ambient Temperature Effect Zero:
Typical: ±0.004% of nominal span/°F
Max: ±0.022% of nominal span/°F
Ambient Temperature Effect Span:
Typical: 0.013% of calibrated span/°F
Max: 0.022% of calibrated span/°F
Temperature Effect: ≤0.02%/°F, zero and span effects combined
Operating Temperature Range:
Buna-N Elastomers: -29 to 71°C (-20 to 160°F)
Fluorocarbon Elastomers: -18 to 71°C (0 to 160°F)
Storage Temperature Range:
Buna-N Elastomers: -40 to 93°C (-40 to 200°F)
Fluorocarbon Elastomers: -26 to 93°C (-15 to 200°F)
Vibration Effects: Less than 0.5% of span per 1 g, 5 to 2000 Hz, 3 g max, 3 axes
Mounting Position Effect: Not measurable
Loop Load, I/P Transducer:
Less than 10 Vdc drop at 20 mA
Less than 12 Vdc drop at 50 mA
Supply Voltage, E/P Transducer:
Intrinsically Safe/Non-Incendive: 9 to 28 Vdc, less than 20 mA
General Purpose: 9 to 40 Vdc, less than 20 mA
Supply Voltage Effect: No effect
Signal Impedance E/P Transducer: 6000 Ω minimum
RFI/EMI Effect NEMA 4X (IP66): Less than 0.25% of span change in output 10 V/meter, 20 to 1000 MHz (Reference SAMA PML 33.1 to 1978, 2 to abc)
Supply Pressure Sensitivity: No effect
Effective Air Consumption: 0.07 SCFM (2 LPM) maximum
Supply Pressure: 100 psig (6.9 bar) maximum*
* For models with zero output capability maximum supply pressure = 40 psi (2.8 bar) above maximum output, except for 0 to 100 and 0 to 120 psi models that have a maximum supply pressure of 130 psi (9 bar) and 140 psi (9.7 bar) respectively.
Dimensions
IP510: 102 H x 48 W x 89 mm D (4.01 x 1.88 x 3.5')
IP511: 144 H x 112 mm W (5.66 x 4.36')
Port Sizes:
Pneumatic: ¼ FNPT
Electrical: ½ FNPT
SPECIFICATIONS
Accuracy:
Typical: ±0.1% of output span
Max: ±0.25% of output span
Hysteresis:
Typical: ±0.01% of output span
Max: ±0.10% of output span
Deadband: No effect
Repeatability:
Typical: ±0.01% of output span
Max: ±0.10% of output span
Ambient Temperature Effect Zero:
Typical: ±0.004% of nominal span/°F
Max: ±0.022% of nominal span/°F
Ambient Temperature Effect Span:
Typical: 0.013% of calibrated span/°F
Max: 0.022% of calibrated span/°F
Temperature Effect: ≤0.02%/°F, zero and span effects combined
Operating Temperature Range:
Buna-N Elastomers: -29 to 71°C (-20 to 160°F)
Fluorocarbon Elastomers: -18 to 71°C (0 to 160°F)
Storage Temperature Range:
Buna-N Elastomers: -40 to 93°C (-40 to 200°F)
Fluorocarbon Elastomers: -26 to 93°C (-15 to 200°F)
Vibration Effects: Less than 0.5% of span per 1 g, 5 to 2000 Hz, 3 g max, 3 axes
Mounting Position Effect: Not measurable
Loop Load, I/P Transducer:
Less than 10 Vdc drop at 20 mA
Less than 12 Vdc drop at 50 mA
Supply Voltage, E/P Transducer:
Intrinsically Safe/Non-Incendive: 9 to 28 Vdc, less than 20 mA
General Purpose: 9 to 40 Vdc, less than 20 mA
Supply Voltage Effect: No effect
Signal Impedance E/P Transducer: 6000 Ω minimum
RFI/EMI Effect NEMA 4X (IP66): Less than 0.25% of span change in output 10 V/meter, 20 to 1000 MHz (Reference SAMA PML 33.1 to 1978, 2 to abc)
Supply Pressure Sensitivity: No effect
Effective Air Consumption: 0.07 SCFM (2 LPM) maximum
Supply Pressure: 100 psig (6.9 bar) maximum*
* For models with zero output capability maximum supply pressure = 40 psi (2.8 bar) above maximum output, except for 0 to 100 and 0 to 120 psi models that have a maximum supply pressure of 130 psi (9 bar) and 140 psi (9.7 bar) respectively.
Dimensions
IP510: 102 H x 48 W x 89 mm D (4.01 x 1.88 x 3.5')
IP511: 144 H x 112 mm W (5.66 x 4.36')
Port Sizes:
Pneumatic: ¼ FNPT
Electrical: ½ FNPT
Show Ratings & Reviews
1) Can I run gases other than air?; 2) It states there is an air consumption rate up to 2 LPM. Does this mean it uses the high pressure gas to maintain pressure at the outlet? Its bleeding air all the time? Is the bleed port threaded?
Hello, this unit is rated for clean dry air. We are checking with engineering on the other questions and will email you directly.
Date published: 2023-11-06
Is this I/P convertor relieving? Ex. If the outlet pressure is higher than the set pressure setpoint, will the pressure be relieved through some exhaust?
These I/P converters have a bleed port that exhausts the excess air pressure to maintain the correct pressure.
Date published: 2022-10-19