Welcome to our new website, found an issue or bug? Please report it here
INET-601

Choose a Variant
Number of Channels, Input
Volume discounts available
Volume Discount Schedule
Quantity | Price each |
---|---|
1-4 | $971.58 |
5-9 | $923.00 |
10-24 | $903.57 |
25-49 | $864.71 |
50-99 | $845.27 |
100+ | $825.84 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product ModelsBrand |
![]() |
Analog I/O Note | Analog: Number of Channels: 16 single-ended (SE)/8 differential (DI), A/D Converter: 24-bit when averaging each point for ≥1m sec; and 16 bits when not averaging, Voltage: See voltage accuracy/range charts, , Protected Voltage: ±30 Vdc with power on or off, RFI Filter: 13 KHz RFI filter on ≤ ±150 mV range Digital: Number of Channels: 4 digital I/O (4 mA sink/source, 0 to 3.3V): “0” Input Voltage: 0 to 0.8 Vdc, “1” Input Voltage: 2 to 5.5 Vdc, “1” Input Current: Amps = Vin / 50 kΩ (“1” must drive internal 50 kΩ pull down resistor), Pull-Down Resistor: 50 kΩ ±1% |
CMRR | ≥110dB (0 to 60 Hz) |
Common Mode Voltage | ±10 Vdc |
Current Measurement Range | ±80 uA, ±120 uA, ±500 uA, ±600 uA, ±800 uA, ±1.2 mA, ±2.5 mA, ±12 mA, ±24 mA, 0 to 24 mA |
Data Interface Note | InstruNet Software |
Digital Filter Type | Elliptic, Chebyshev B, Chebyshev S, or Butterworth |
Digital I/O Note | Number of Channels: 4 digital I/O (4 mA sink/source, 0 to 3.3V) “0” Input Voltage: 0 to 0.8 Vdc “1” Input Voltage: 2 to 5.5 Vdc “1” Input Current: Amps = Vin / 50 kΩ (“1” must drive internal 50 kΩ pull down resistor) “0” Output Voltage: <0.7 Vdc @ <2 mA; < 0.9 Vdc @ 4 mA “1” Output Voltage: 2.2 to 3.3 Vdc @ 4 mA Pull-Down Resistor: 50 kΩ ±1% Sink Current: 4 mA |
Digital Input | Digital: Low = 0 to 0.8 Vdc |
Digital Output | “0” Output Voltage: <0.7 Vdc @ <2 mA; < 0.9 Vdc @ 4 mA, “1” Output Voltage: 2.2 to 3.3 Vdc @ 4 mA |
Height | 58 mm |
Impedance Input | 100 MΩ |
Input Type | Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain, Potentiometer, Current, Resistance, Flow, Pressure, Digital |
Isolation | ±36 Vdc bank electrical isolation |
Length | 24 mm |
Materials | Plastic |
Mounting | Place on Desktop, Attach to Wall, or place inside another Enclosure (OEM) |
Number of Channels, Input | Analog: 8 DIFF/16 SE, Digital: 4 with electrical isolation |
Number of Channels, Output | Digital: 4 |
Operating Temperature, Max | 70 °C |
Operating Temperature, Min | 1 °C |
Output Signal | Digital |
Protection | Protected Voltage: ±30 Vdc with power on or off |
Pull-down Resistor | 50 kΩ ±1% |
Relative Humidity | <90% RH, no condensation |
Resistance Measurement Range | 1 to 50 kΩ Pot, 0 to 33 Ω, 0 to 100 Ω, 0 to 330 Ω, 0 to 1 kΩ, 0 to 3300 Ω, 0 to 10 kΩ |
Sensor Type | Thermocouple Type J, K, T, E, R, S, B, N, C, G, D, 100 Ω RTD, 500 Ω RTD, 1 kΩ RTD, 2252 Ω Thermistor |
Storage Temperature, Max | 70 °C |
Storage Temperature, Min | -20 °C |
Supply Power Note | Voltage Reference At Hd44 Connector: 3.30 Vdc (80 mA) |
Supply Power Type | DC |
Supply Voltage | ± 5 Vdc |
Temperature Measurement Range | TEMP LABEL 1 To be Updated |
Voltage Measurement Range | ±20 mV, ±40 mV, ±80 mV, ±150 mV, ±300 mV, ±600 mV, ±1.2V, ±2.5V, ±5V, ±10V |
Width | 96 mm |
See All Specs |
PDFs & Manuals
Show Ratings & Reviews
Rated 2 out of
5
by
Duracell Engineering from
Nice however noisy data. 4 errors out of 300,000.
Noisy DAQ. Records erroneous data points at 1 KHZ sample rate.
Date published: 2021-09-08