Skip to search Skip to main content Skip to navigation

Click and hold to zoom

PX409-DIF

High Accuracy oil filled Wet/Dry and Wet/Wet Differential Pressure Transducers

4.7

(6)

Models In Stock

FAST DELIVERY!
5-Point NIST Traceable Calibration
Precision Micro-Machined Silicon Core

See Product Overview

PX409-DIF

From ^$ 956.13

Models In Stock

Shop Models

More Variations Available

See all series options below

Data Sheet

Can't find the right model?

Use our custom configurator to fine tune your product

Product Overview

Accuracy Class < 0.1%
Bandwidth DC to 1 kHz
Cable Length 2 m
Insulation Resistance 100 MΩ
Line/Static Pressure 500 psi max
Materials, Wetted 316L Stainless Steel
Media Compatibility Air, Alkaline solutions, Any, Argon, Carbon dioxide, Dilute Acids, Gases, Helium, Hydraulic Oil, Hydrogen, Light Oil, Liquids, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids
Positive Side differential wetted materials 316L stainless steel
Pressure Cycles 1 million, minimum
Pressure Type Differential
Process Connection Size 1/4 in
Response Time <1 ms
Shock 50 g, 11 ms half-sine
Stability ± 0.1%
Stability Note Long Term Stability (1-Year): ± 0.1% FS typical
Vibration 5-2000-5 Hz, 30 minute cycle,Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis
Weight 200 g

Get all the great performance characteristics of the Micro-Machined Silicon Transducers in these wet/wet differential pressure models. These rugged stainless steel transducers are ideal for tough industrial automotive, or aerospace applications. They can be used in test benches, fitler monitoring, hydraulic, flow, or water/wastewater applications, as well as factory or pneumatic air, pitot tubes, air speed and other industrial or aerospace applications. The solid state silicon core and avaliable all stainless steel wetted parts will provide long, reliable service life with excellent long term stability.

PDFs & Manuals

PX409-DIF_spec View More

View Less

Compliance

View Less

Reviews

Show Ratings & Reviews

4.7

(6)

Questions & Answers

Videos & Downloads

PX409-DIF

High Accuracy oil filled Wet/Dry and Wet/Wet Differential Pressure Transducers

Is PX409-10WDWUUSBH can measure every Dry/Wet, Wet/dry, and Wet/Wet environment?

A previous answer stated "A static pressure 500 psi above the rated differential pressure range... can be applied simultaneously to both ports." Does this apply to all models? (i.e. the 0-250dpsi model is rated to 750psi line pressure instead of 500psi?)

Should the transducer body be in a horizontal or vertical orientation when the ports are in a horizontal orientation?

Item# PX409-015DWUUSBH The data sheet states that the Output Signal is Digital and the Electrical Output is USB. Is there software available to monitor the transducers output if this connects thru USB?

I'm attempting to get a steady state flow through one of our apparatuses for flow assurance research for glaucoma but there is a problem with air being in the sytem during the flow testing. What is the best way to eliminate air from the equation?

Is this series fuel safe? We intend to use them for monitoring water and diesel fuel tanks. Thank you.

If I am using the instrument to measure differential pressure within two-phase flow, is there any additional features I chould include? Like wet/wet diff?

Currently I have the black and red cables attached to a COM and V supply respectively. I was wondering of the remaining green and white cables, which one is used as the analog input wire?

PX409-DIF

High Accuracy oil filled Wet/Dry and Wet/Wet Differential Pressure Transducers

Is PX409-10WDWUUSBH can measure every Dry/Wet, Wet/dry, and Wet/Wet environment?

A previous answer stated &quot;A static pressure 500 psi above the rated differential pressure range... can be applied simultaneously to both ports.&quot; Does this apply to all models? (i.e. the 0-250dpsi model is rated to 750psi line pressure instead of 500psi?)

Should the transducer body be in a horizontal or vertical orientation when the ports are in a horizontal orientation?

Item# PX409-015DWUUSBH The data sheet states that the Output Signal is Digital and the Electrical Output is USB. Is there software available to monitor the transducers output if this connects thru USB?

I'm attempting to get a steady state flow through one of our apparatuses for flow assurance research for glaucoma but there is a problem with air being in the sytem during the flow testing. What is the best way to eliminate air from the equation?

Is this series fuel safe? We intend to use them for monitoring water and diesel fuel tanks. Thank you.

If I am using the instrument to measure differential pressure within two-phase flow, is there any additional features I chould include? Like wet/wet diff?

Currently I have the black and red cables attached to a COM and V supply respectively. I was wondering of the remaining green and white cables, which one is used as the analog input wire?

A previous answer stated "A static pressure 500 psi above the rated differential pressure range... can be applied simultaneously to both ports." Does this apply to all models? (i.e. the 0-250dpsi model is rated to 750psi line pressure instead of 500psi?)