Welcome to our new website, found an issue or bug? Please report it here
OS-HFV50-601-LT
60:1 FOV, 0°C to 1300°C
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $950.80 |
| 5-9 | $903.26 |
| 10-24 | $884.24 |
| 25-49 | $846.21 |
| 50-99 | $827.20 |
| 100+ | $808.18 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Additional Features 1 | Simultaneous analog and digital outputs |
| Cable Length | 3 m |
| Cable Length Note | 3 m (standard, 4-cores), 5 m/10 m |
| Current Draw | 100 mA |
| Data Interface | USB |
| Emissivity Note | 0.100 to 1.000, in 0.001 increments |
| Emissivity, Max | 1 |
| Emissivity, Min | 0.1 |
| Enclosure Ratings | IP64 |
| Field of view | 60:1 |
| Intrisically Safe | No |
| Loop Resistance, Max | 500 Ω |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | 0 °C |
| Output Signal | Current |
| Process Temperature, Max | 900 °C |
| Process Temperature, Min | 0 °C |
| Relative Humidity Note | 10 to 95%, non-condensing |
| Relative Humidity, Max | 95% |
| Relative Humidity, Min | 10% |
| Repeatability | ± 0.5% of reading or ± 1°C |
| Response Time | 150 ms |
| Response Time Note | 150 ms ((95% signal)) |
| Sensor Diameter | 59.5 mm |
| Sensor Length | 110 mm |
| Spectral Response, Max | 14 μm |
| Statistics | Average, Peak Hold, Valley Hold |
| Storage Temperature, Max | 80 °C |
| Storage Temperature, Min | -20 °C |
| Supply Power Note | 24 VDC ± 20% |
| Supply Voltage | 24 Vdc |
| Temperature Resolution | 0.1 °C |
| Weight | 500 g |
| Weight Note | 500g (without cable) |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 4 out of
5
by
JMcIntyre from
Good device, bad documentation
The product works well, but the operator's manual contains a MAJOR error in the section on how to set up the sensor. The manual says to enter setup mode by pressing and holding both buttons. However, pressing and holding down, then pressing up resets the sensor, erasing all settings. Setup must be entered by pressing and holding up, then pressing down. This is not explained in the manual. It took 6 calls to Omega over two days to even explain to a tech support person what the error was. I hope that it will be corrected in future documentation.
Date published: 2021-02-09