1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
DP41-S-Series
High Performance Strain Meter, High Resolution 6-Digit Display
Models In Stock
- Compatible with Strain Gage Bridge Sensors or Ratiometric Voltage Sensors
- Adjustable Filtering Up to 13 Hz
- Displays Up to 999,999 Counts
- NEMA-4 Front Panel
DP41-S-Series
From
$
1,017.96
Models In Stock
Product Overview
- Accuracy ± 0.005 %
- Analog-to-Digital Technique Dual slope
- CMRR 120 dB
- Common Mode Voltage 1500 Vp per HV test
- Cutout Dimensions 1.772 x 3.622 in
- Display Note Red 6-digit, 14-segment, 13.7 mm (0.54") high; 4 alarm indicators
- Display Type LED
- Form factor 1/8 DIN
- Height 1.89 in
- Input Configuration Front panel buttons or via your computer
- Input Range Note 0 to 100 mV, 0 to 1V, 0 to 5V, 1 to 5V, 0 to 10V, 0 to 100V, ± 50 mV, ± 500 mV, ± 5V, ± 50V, 0 to 20 mA, 4 to 20 mA
- Input Type Single Ended, Strain
- Internal Resolution 15 bit
- Length 6.5 in
- Materials Polycarbonate
- Measurement Type Strain
- Mounting Panel
- NMRR 60 dB
- Number of Digits 6
- Number of Inputs 1
- Offset Adjustment 0 to 999999 or 0 to - 99999 programmable
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Polarity Unipolar/Bipolar, programmable
- Power Consumption 10 W
- Power Consumption Note 6 W Nominal, 10 W
- Reading Rate 3/s or 13/s, 60 Hz; 3/s or 12/s, 50 Hz
- Relative Humidity 95% RH non-condensing
- Resolution 15-bit
- Sampling Rate 13 Hz (13 updates/second)
- Sensor Break Protection Up-scale or down-scale, programmable
- Sensor Excitation 10 V at 30 mA; 24V at 25 mA
- SetPoint Outputs 4 Isolated Open Collector; Rated 150 mA at 1V Sink, 30V Open
- Span Adjustment 0.00001 to 500,000, programmable
- Span Temperature Coefficient ± 20 ppm
- Step Response 1 s to 99.9%
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Warm Up Time 50 min
- Weight 574 g
- Width 3.78 in
The OMEGA ® DP41-S indicators offer exceptional performance in a strain gage meter. The DP41-S has standard built-in excitation. The input range is selected via internal jumpers, and scaling to engineering units is performed using the front keypad. The DP41-S accepts strain gage bridge sensors and ratiometric voltage measurements. Programming the DP41-S is accomplished through the five front panel keypads. If the optional RS-232 or RS-485 communications are installed, the operator can remotely set all display parameters.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
PDFs & Manuals
