Skip to search Skip to main content Skip to navigation

ACC793-series

High Performance, Top Mount Accelerometers

(0)

Premium Grade
Intrinsic Safety Certified Options
Hermetic Design
ESD Protection UReverse Wiring Protection

See Product Overview

ACC793-series

From ^$ 446.34

Shop Models

3 Variations available

See all series options below

Product Overview

The OMEGAROMETER™ Series accelerometers are designed for industrial vibration measurements. These accelerometers feature a hermetically sealed 316L stainless steel case suitable for harsh environments. The ACC793 is a high performance accelerometer with a top cable exit. FM and CSA intrinsic safety approval is an available option.

SPECIFICATIONS:

DYNAMIC
Sensitivity, ±5%, 25°C (77°F): 100 mV/g
Acceleration Range: 80 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
    ±5%: 1.5 to 5000 Hz
    ±10%: 1.0 to 7000 Hz
    ±3 dB: 0.5 to 15,000 Hz
Resonance Frequency: 25 kHz
Transverse Sensitivity, Max: 5% of axial
Temperature Response: -50°C (-58°F) = -10%; 120°C (248°F) = 5%

ELECTRICAL
Power Requirement:
    Voltage Source: 18 to 30 Vdc
    Current Regulating Diode¹: 2 to 10 mA

Electrical Noise (Equiv. g, Nominal):
Broadband: 2.5 Hz to 25 kHz: 600 µg
Spectral:
   10 Hz: 8 µg/√Hz
   100 Hz: 5 µg/√Hz
   1000 Hz: 5 µg/√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage: 12 Vdc
Grounding: Isolated case, internally shielded

ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Base Strain Sensitivity, Max: 0.0005 g/microstrain
Sealing: Hermetic to 10^-8 cc/s

PHYSICAL
Weight: 112 g (3.9 oz)
Case Material: 316L SS
Mounting: ¼-28 tapped hole
Output Connector: 2 pin, MIL-C-5015 style
Connections:
    Pin A: Power/signal
    Pin B: Common
Mating Connector: Amphenol 97-3106A-10SL-4S type
Recommended Cabling: ACC-CB7-10
Agency Approvals:
    FM: Class I, II, III, Division I, Groups A, B, C, D, E, F, G; Division II, Groups A, B, C, D, F, G
    CSA: Class I, Division I, Groups A, B, C, D

Compliance

View Less

Reviews

Show Ratings & Reviews

(0)

Questions & Answers

It is not completely clear from the spec sheet how the ACC793 should be wired up.  How is it intended for the power to get in, and for the signal to get out, through the same pin?  Is there a sample circuit or application note available anywhere?

Asked by: Paul1324

The ACC793 accelerometer is part of a system consisting of the accelerometer, a cable from the accelerometer (ACC-CB7-10) to an in-line constant current power supply (ACC-PS5). You will also need an output cable with a BNC connector to connect to the device you will be using to read the signal. We do not offer the output cable.

Answered by: Applicatrions Engineer JK

Date published: 2023-09-27

Are the Accelerometers able to be adjusted to a more limited peak g force range? say 10g, or changing the sensitivity of the device from 100mV/g to 500mV/g?

Asked by: jerrad

Thank you for your question. Unfortunately, the accelerometers are not able to be adjusted. The sensitivity and hence the g range is fixed. Please contact our Tech Support if you have any future questions we can assist you with.

Answered by: Jane

Date published: 2019-04-12

Videos & Downloads

Compliance Certificates (3)

ACC793-series

High Performance, Top Mount Accelerometers

It is not completely clear from the spec sheet how the ACC793 should be wired up. &nbsp;How is it intended for the power to get in, and for the signal to get out, through the same pin? &nbsp;Is there a sample circuit or application note available anywhere?

Are the Accelerometers able to be adjusted to a more limited peak g force range? say 10g, or changing the sensitivity of the device from 100mV/g to 500mV/g?

It is not completely clear from the spec sheet how the ACC793 should be wired up. How is it intended for the power to get in, and for the signal to get out, through the same pin? Is there a sample circuit or application note available anywhere?