Skip to search Skip to main content Skip to navigation

Welcome to our new website, found an issue or bug? Please report it here
  1. Home
  2. See Force & Strain Measurement
  3. See Strain Meters
  4. See High Speed Load/Strain Meters and Process/Voltmeters
  5. DP7600-R
We noticed you are from . Visit your local site for regional offers and live support.
Stay here.
Go to the site >

DP7600-R

High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available

0.0
(0)
High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available
Click and hold to zoom
See all Models See all accessories

$1,313.64

Item# DP7600-R

Volume discounts available
Volume Discount Schedule
Quantity Price each
1-9 $1,313.64
10-24 $1,247.96
25-49 $1,182.28
50-99 $1,116.59
100-499 $1,050.91
500+ $985.23

In Stock

Lead Time (If not in stock): 30 weeks
+ Add to Project List
See Specs

Product Specs

<< See all Product Models
Brand
Accuracy ± 0.01 %
Accuracy Note ± 0.01% of reading ± 1 count of A/D @ 25°C (77°F)
Bridge Resistance 100 to 5000 Ω
Bridge Resistance Note 100 to 5000 Ω; 4-wire or 6-wire configuration
Calibration Note Shunt calibration capability with span programmable from front panel; no potentiometer adjustments; access code prevents unauthorized calibration switches
Channels One channel standard, second channel optional
Coarse Gain Setting Selectable by rear switches
Control Output Relays: Dual 115 Vac 2.5 A
Convert/Hold Input Normally high; if pulled low, holds display
Cutout Dimensions 2.45 x 5.06 in
Data Interface N/A
Digital Filter Programmable Cutoff Frequency
Display Note -32768 to 32767 with programmable decimal points; 14 mm (0.56") red LED
Display Type LED
Electrical Connection Screw Terminal
Electrical Output N/A
Form factor 1/8 DIN
Height 2.7 in
Input Analog Filter 4-pole active anti-alias; 500 Hz cutoff on single-channel unit and 250 Hz cutoff on dual-channel unit
Input Bias Current ± 50 nA maximum ± 100 pA/°C (per input channel)
Input Configuration Front Keypad
Input Type Strain
Internal Resolution 16 bit
Length 6.9 in
Materials Aluminum, Crystal
Measurement Type Current, Strain, Voltage
Mounting Panel
Number of Digits 5
Number of Inputs 1
Operating Temperature, Max 60 °C
Operating Temperature, Min -20 °C
Output Detail Relays: Dual 115 Vac, 2.5 A, form “A” relay contacts (isolated transistor outputs not available when relays are installed); limit #1 and limit #2 activate the relay contacts
Output Method RJ11 jack for serial interface
Output Signal N/A
Peak Detection Updated at rate selected by digital filter, peak stored in memoryrogrammed to give limit #1 output up to 100 seconds after a programmed limit is reached. This output can be used to reset the peak reading by tying limit #1 output to remote input
Power Consumption 8 W
Range Selection Selectable by dip switch on rear of unit
Range Selection Note 5.1, 10.2, 15.3, 20.0, 26.3, 30.6, 35.1, 39.2 (in mV)
Reading Rate Limited to 1000/s divided by number of channels
Remote Inputs Display Peak, Display Runout, Reading, Reset Peak, Runout Reading, Tare
Resolution 16-bit A/D
Rollover Error ± 2 counts of A/D @ 25°C (77°F)
Runout Mode Updated at rate selected by digital filter. Runout is normally stored in memory and recalled via front-panel switch, over the serial interface, or by selecting runout display mode on rear connector.
Sampling Rate 1000 Hz
Sensor Excitation ± 15 Vdc, ± 5 Vdc @ ± 50 mA
SetPoint Outputs 4 isolated open collector transistor outputs rated 30 Vdc maximum; will sink up to 50 mA; 300 V isolation between limit outputs and system ground; limit #1 can be programmed to be delayed from 1 to 100 seconds
Settable Parameters Digital Filter, Limits, Offset, Span
Supply Power Type AC
Supply Voltage 115 Vac
Weight 370 g
Width 5.18 in
See All Specs Show Less
High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available DP7600-R DP7600-R
0.0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 3ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
en-US
en
Save Configuration