1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
MMA5.0KC1P3J5T4A3P
MMA5-0KC1P3J5T4A3P

Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product ModelsBrand |
![]() |
ADC Resolution | None |
Accuracy | ± 0.08 % |
Bandwidth | DC to 1 kHz |
Burst Pressure | 3000 psi |
Compensated Temperature, Max | 105 °C |
Compensated Temperature, Min | -40 °C |
Electrical Connection | M12 4 pin Female |
Electrical Output | 4 to 20 mA |
Enclosure Ratings | IP65 |
Insulation Resistance | 100 MΩ @ 50 Vdc |
Materials, Wetted | 316L Stainless Steel |
Media Compatibility | Air, Alkaline solutions, Any, Argon, Carbon dioxide, Dilute Acids, Gases, Helium, Hydraulic Oil, Hydrogen, Light Oil, Liquids, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids |
Operating Temperature, Max | 121 °C |
Operating Temperature, Min | -45 °C |
Output Signal | Current |
Pressure Cycles | 1 million, minimum |
Pressure Type | Absolute |
Pressure, Max | 5000 psi |
Pressure, Min | 0 psi |
Process Connection Size | 7/16 in |
Process Connection Type | UNF Male |
Proof Pressure | 4x Full Scale up to 3000 psi |
Response Time | <1 ms |
Shock | 50 g, 11 ms half sine, vertical and horizontal axis |
Span Setting Adjustable Range | ± 10% span |
Stability | ± 0.1% |
Stability Note | Long Term Stability (1-Year): ± 0.1% FS typical. |
Supply Power Note | 9 to 30 Vdc [9 to 20 Vdc above 105°C (229°F)] max loop res Ω = (Vs-9) x 50 |
Supply Voltage | 9 to 30 Vdc |
Thermal Effect on Zero error, Max | ± 0.5% FS |
Trim Pot Access | O-ring sealed screws on side cover |
Vibration | 5-2000-5 Hz, 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis |
Weight | 200 g |
Zero Setting Adjustable Range | ± 10% span |
See All Specs |
PDFs & Manuals
Show Ratings & Reviews