Welcome to our new website, found an issue or bug? Please report it here
MMDWU001C1P4C2T2A1P
0 to 1 psi, 0.1% to 0.25% Accuracy, Current, 4 to 20 mA 1/4", NPT Male, Conduit, -10 to 93 °C (0 to 200 °F)
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $1,587.43 |
| 10-24 | $1,508.06 |
| 25-49 | $1,476.31 |
| 50-99 | $1,412.81 |
| 100+ | $1,381.06 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| ADC Resolution | None |
| Accuracy | ± 0.2 % |
| Bandwidth | DC to 1 kHz |
| Burst Pressure | 1000 psi Maximum |
| Cable Length | 2 m |
| Compensated Temperature, Max | 93 °C |
| Compensated Temperature, Min | -18 °C |
| Electrical Connection | 1/2 NPT male Conduit with Cable |
| Electrical Output | 4 to 20 mA |
| Enclosure Ratings | IP67 |
| Insulation Resistance | 100 MΩ @ 50 Vdc |
| Line/Static Pressure | 500 psi max applied to both sides simultaneously |
| Materials, Wetted | 316L Stainless Steel |
| Media Compatibility | Air, Alkaline solutions, Any, Argon, Carbon dioxide, Dilute Acids, Gases, Helium, Hydraulic Oil, Hydrogen, Light Oil, Liquids, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids |
| Negative Side differentional compatable fluids or gasses | Same as positive side |
| Operating Temperature, Max | 121 °C |
| Operating Temperature, Min | -45 °C |
| Output Signal | Current |
| Positive Side differential wetted materials | 316L stainless steel |
| Pressure Cycles | 1 million, minimum |
| Pressure Type | Differential |
| Pressure, Max | 1 psi |
| Pressure, Min | 0 psi |
| Process Connection Size | 1/4 in |
| Process Connection Type | NPT Male |
| Proof Pressure | 6x Full Scale up to 1000 psi |
| Proof Pressure Note | Positive Side |
| Response Time | <1 ms |
| Shock | 50 g, 11 ms half sine, vertical and horizontal axis |
| Span Setting Adjustable Range | ± 10% span |
| Stability | ± 0.1% |
| Stability Note | Long Term Stability (1-Year): ± 0.1% FS typical. |
| Supply Power Note | 9 to 30 Vdc [9 to 20 Vdc above 105°C (229°F)] max loop res Ω = (Vs-9) x 50 |
| Supply Voltage | 9 to 30 Vdc |
| Thermal Effect on Zero error, Max | ± 1% FS |
| Trim Pot Access | O-ring sealed screws on side cover |
| Vibration | 5-2000-5 Hz, 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis |
| Weight | 200 g |
| Zero Setting Adjustable Range | ± 10% span |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Sally from
Transducer works as expected
Signal is stable. Was not clear to me from the data sheet, but the conduit option comes with prepped wire leads.
Date published: 2023-01-31