Welcome to our new website, found an issue or bug? Please report it here
MX1102A
HOBO MX Bluetooth Low Energy CO2, Temperature and Humidity Data Logger with Display
Choose a Variant
Number of Measurements
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy Note | Temperature Sensor Accuracy: ± 0.20°C from 0° to 50°C (± 0.36°F from 32° to 122°F), Relative Humidity Accuracy: ± 2% from 20% to 80% typical at 25°C, CO2 Accuracy: ± 50 ppm ± 5% of reading at 25°C (77°F), less than 70% RH and 1,013 mbar |
| Approvals | CE |
| Battery Size and Type | Alkaline AA |
| Battery life | up to 6 mo, with reading interval of 5 min |
| CO2 Accuracy | ± 50 ppm |
| CO2 Measurement Range | 0 to 5000 ppm |
| Calibration | Auto or Manual to 400 ppm |
| Configuration | HOBOmobile® app, Android, iOS, HOBOware for PC |
| Data Interface | Bluetooth |
| Data Interface Note | Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later Bluetooth Compatibility :Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart) |
| Display | LCD |
| Display Note | LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range |
| Enclosure Ratings | IP50 |
| Form factor | Wall Bracket Mount |
| Height | 1.88 in |
| Input Type | Internal |
| Length | 5.1 in |
| Logging Modes | burst, Fixed interval |
| Measurement Range Note | RH :1% to 70% RH when CO2 sensor is enabled (non-condensing), 1% to 90% RH when CO2 sensor is disabled (non-condensing) |
| Measurement Type | CO2, Relative Humidity, Temperature |
| Memory | 128 KB |
| Memory Modes | stop when full, Wrap when full |
| Memory Note | 20 seconds via USB; approximately 60 seconds via Bluetooth Smart, may take longer the further the device is from the logger |
| Number of Measurements | 3 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| RH Measurement Range | 1 to 90% RH |
| RH Resolution | 0.0001 |
| RH Sensor Drift | <1% Per Year |
| Radio Power | 1 mW |
| Relative Humidity | 1% to 90% RH non-condensing |
| Relative Humidity Accuracy | ± 2% RH |
| Resolution Note | Temperature Sensor Resolution: 0.024°C at 25°C, Relative Humidity Resolution: 0.01% at 25°C |
| Response Time | Temperature: 12 Min, RH: 1 Min, CO2: 1 Min |
| Response Time Note | Temperature: 12 Minutes to 90% in airflow of 1 m/s, RH: 1 Minute to 90% in airflow of 1 m/s, CO2: 1 Minute to 90% in airflow of 1 m/s |
| Restart Mode | Push button |
| Samples,Max | 85k Samples, Interval Selectable 1 sec to 18hrs |
| Sensor Type | Non-Dispersive Infrared (NDIR) |
| Start Modes | At set date and time, Button Push, Immediate Start, Next Interval |
| Stop Modes | Button Push, When Memory is Full, At set date and time, At set Duration |
| Supply Power Type | Battery |
| Temperature Accuracy | ± 0.21°C |
| Temperature Measurement, Max | 50 °C |
| Temperature Measurement, Min | 0 °C |
| Temperature Resolution | 0.024 °C |
| Temperature Sensor Drift | < 0.1°C Per Year |
| Time Accuracy | ± 1 minute/month at 25°C |
| Transmission Range | 30.5 m |
| Weight | 9.43 oz |
| Width | 3 in |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews