Welcome to our new website, found an issue or bug? Please report it here
MX1102a-CO2-Logger
HOBO MX Bluetooth CO2, Temp and RH Data Logger with Display
Models In Stock
- Bluetooth Low Energy (BLE) 100-foot communications
- Stores: 84,000 measurements
- Accuracy: ± 50 ppm, ± 0.2°C (± 0.4°F) and ± 2%RH
- Multiple Start & Stop options
MX1102a-CO2-Logger
From
$
676.11
Models In Stock
Product Overview
- Accuracy Note Temperature Sensor Accuracy: ± 0.20°C from 0° to 50°C (± 0.36°F from 32° to 122°F), Relative Humidity Accuracy: ± 2% from 20% to 80% typical at 25°C, CO2 Accuracy: ± 50 ppm ± 5% of reading at 25°C (77°F), less than 70% RH and 1,013 mbar
- Approvals CE
- Battery life up to 6 mo, with reading interval of 5 min
- Battery Size and Type Alkaline AA
- Calibration Auto or Manual to 400 ppm
- CO2 Accuracy ± 50 ppm
- CO2 Measurement Range 0 to 5000 ppm
- Configuration HOBOmobile® app, Android, iOS, HOBOware for PC
- Data Interface Bluetooth
- Data Interface Note Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later Bluetooth Compatibility :Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart)
- Display LCD
- Display Note LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
- Enclosure Ratings IP50
- Form factor Wall Bracket Mount
- Height 1.88 in
- Input Type Internal
- Length 5.1 in
- Logging Modes burst, Fixed interval
- Measurement Range Note RH :1% to 70% RH when CO2 sensor is enabled (non-condensing), 1% to 90% RH when CO2 sensor is disabled (non-condensing)
- Measurement Type CO2, Relative Humidity, Temperature
- Memory 128 KB
- Memory Modes stop when full, Wrap when full
- Memory Note 20 seconds via USB; approximately 60 seconds via Bluetooth Smart, may take longer the further the device is from the logger
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Radio Power 1 mW
- Relative Humidity 1% to 90% RH non-condensing
- Relative Humidity Accuracy ± 2% RH
- Resolution Note Temperature Sensor Resolution: 0.024°C at 25°C, Relative Humidity Resolution: 0.01% at 25°C
- Response Time Temperature: 12 Min, RH: 1 Min, CO2: 1 Min
- Response Time Note Temperature: 12 Minutes to 90% in airflow of 1 m/s, RH: 1 Minute to 90% in airflow of 1 m/s, CO2: 1 Minute to 90% in airflow of 1 m/s
- Restart Mode Push button
- RH Measurement Range 1 to 90% RH
- RH Resolution 0.0001
- RH Sensor Drift <1% Per Year
- Samples,Max 85k Samples, Interval Selectable 1 sec to 18hrs
- Sensor Type Non-Dispersive Infrared (NDIR)
- Start Modes At set date and time, Button Push, Immediate Start, Next Interval
- Stop Modes Button Push, When Memory is Full, At set date and time, At set Duration
- Supply Power Type Battery
- Temperature Accuracy ± 0.21°C
- Temperature Measurement, Max 50 °C
- Temperature Measurement, Min 0 °C
- Temperature Resolution 0.024 °C
- Temperature Sensor Drift < 0.1°C Per Year
- Time Accuracy ± 1 minute/month at 25°C
- Transmission Range 30.5 m
- Weight 9.43 oz
- Width 3 in
The HOBO MX1102A CO2/Temp/RH data logger uses integrated sensors to record carbon dioxide (CO2), temperature, and/or relative humidity (RH) in indoor environments. This Bluetooth Low Energy (BLE)-enabled logger is designed for wireless communication with an iOS or Android mobile device.
Using the HOBOmobile app, you can easily configure the logger, read it out, view data on your phone or tablet, export the data, or automatically upload the data to HOBOlink’s free cloud storage, for further analysis. The logger can calculate minimum, maximum, average, and standard deviation statistics and can be configured to trip audible or visual alarms at thresholds you specify. The MX1102A supports burst logging, in which data are logged at a different interval when sensor readings are above or below certain limits. This compact data logger also has a built-in LCD screen to display the current CO2, temperature, relative humidity, logging status, battery use, memory consumption, and more.
You can download the HOBOmobile app for free for Android devices here and for iOS devices here.
The Hobo MX Gateway (purchased separately) can be used to aggregate the data from up to 100 Hobo MX data loggers directly to a PC via Ethernet or WiFi communications.
Using the HOBOmobile app, you can easily configure the logger, read it out, view data on your phone or tablet, export the data, or automatically upload the data to HOBOlink’s free cloud storage, for further analysis. The logger can calculate minimum, maximum, average, and standard deviation statistics and can be configured to trip audible or visual alarms at thresholds you specify. The MX1102A supports burst logging, in which data are logged at a different interval when sensor readings are above or below certain limits. This compact data logger also has a built-in LCD screen to display the current CO2, temperature, relative humidity, logging status, battery use, memory consumption, and more.
You can download the HOBOmobile app for free for Android devices here and for iOS devices here.
The Hobo MX Gateway (purchased separately) can be used to aggregate the data from up to 100 Hobo MX data loggers directly to a PC via Ethernet or WiFi communications.
PDFs & Manuals
