Welcome to our new website, found an issue or bug? Please report it here
MX2501

Choose a Variant
Number of Measurements
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product ModelsBrand |
![]() |
Accuracy Note | pH Sensor Accuracy: In pH: ± 0.10 pH units within ± 10°C of temperature at calibration, In mV: ± 0.20 mV |
Additional Features 1 | Submersible, Waterproof to 40 m |
Approvals | CE |
Battery Size and Type | Alkaline AA |
Battery life | 1 yr, typical with reading interval of 1 min |
Buoyancy | Fresh water: 0.48 oz Negative |
Configuration | HOBOmobile® app Android, iOS |
Current Resolution | Temperature: 0.1°C, 14 bit, Relative Humidity: 0.1%, 12 bit |
Data Interface | Bluetooth |
Enclosure Ratings | IP68 |
Form Factor Note | There are two mounting options: Attach a nylon cord or other strong cable to the mounting hole to deploy the logger. |
Form factor | Hangging hole |
Height | 1.68 in |
Input Type | Internal |
Length | 9 in |
Logging Modes | burst, Fixed interval |
Materials | Polycarbonate, TPV |
Measurement Range Note | pH in mV: -512 to 512 mV |
Measurement Type | pH, Temperature |
Memory | 152 KB |
Memory Modes | stop when full, Wrap when full |
Memory Note | Approximately 60 seconds; may take longer the further the device is from the logger |
Number of Measurements | 2 |
Operating Temperature Note | -2° to 50°C — non-freezing |
Operating Temperature, Max | 50 °C |
Operating Temperature, Min | -2 °C |
Pressure Resolution | Temperature: 0.1°C, 14 bit, Relative Humidity: 0.1%, 12 bit |
Pulse Resolution | Temperature: 0.1°C, 14 bit, Relative Humidity: 0.1%, 12 bit |
RH Resolution | 0.1%, 12 bit |
Radio Power | 1 mW |
Resistance Resolution | Temperature: 0.1°C, 14 bit, Relative Humidity: 0.1%, 12 bit |
Resolution Note | Temperature Sensor Resolution: 0.1°C, 14 bit, RH Resolution: 0.1%, 12 bit |
Response Time | Temperature: 7 Min, pH: 1 Min |
Response Time Note | Temperature: 7 Minutes typical to 90% in stirred water, pH: 1 Minute typical to 90% at constant temperature in stirred water |
Samples,Max | 43300 Samples, Interval Selectable 1 sec to 18hrs |
Start Modes | At set date and time, Button Push, Immediate Start, Next Interval |
Stop Modes | Button Push, When Memory is Full, At set date and time, At set Duration |
Supply Power Note | One AA 1.5 Volt, user-replaceable |
Supply Power Type | Battery |
Temperature Accuracy | ± 0.2 °C |
Temperature Measurement, Max | 50 °C |
Temperature Measurement, Min | -2 °C |
Temperature Resolution | 0.1 °C |
Time Accuracy | ± 1 minute/month 0° to 50°C |
Transmission Range | 30.5 m |
Voltage Resolution | Temperature: 0.1°C, 14 bit, Relative Humidity: 0.1%, 12 bit |
Water Detection | 100 µS/cm |
Water Detection Note | Water conductivity level of 100 µS/cm or greater necessary for reliable detection of water. Deionized water or water below 100 µS/cm may not be detected. The water conductivity circuit may not reliably detect water that has frozen around the electrodes, i.e. below 0°C |
Water Level Resolution | Temperature: 0.1 °C, 14 bit, Relative Humidity: 0.1%, 12 bit |
Weight | 9.46 oz |
pH Accuracy | ± 0.10 pH |
See All Specs |
PDFs & Manuals
Show Ratings & Reviews