Welcome to our new website, found an issue or bug? Please report it here
MX1101-TH-Logger
HOBO MX Bluetooth Temperature and Humidity Logger with Display
- Bluetooth Low Energy (BLE) 100-foot communications
- Stores: 84,000 measurements
- Accuracy: ± 50 ppm, ± 0.2°C (± 0.4°F) and ± 2%RH
- Multiple Start & Stop options
MX1101-TH-Logger
From
$
176.97
Product Overview
- Accuracy Note Temperature Sensor Accuracy: ± 0.21°C from 0° to 50°C, Relative Humidity Accuracy: ± 2% from 20% to 80% at 25°C
- Approvals CE
- Battery life 1 yr, typical with reading interval of 1 min
- Battery Size and Type Alkaline AAA
- Configuration HOBOmobile® app Android, iOS
- Data Interface Bluetooth
- Data Interface Note Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, or Android 4.4, 5.0, 5.1 and Bluetooth 4.0 or later Bluetooth Compatibility : Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart)
- Display Note LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
- Display Type LCD
- Enclosure Ratings IP50
- Form factor Magnetic Surface or Insert the tie wraps
- Form Factor Note "Use the four magnets on the back of the logger case to mount it to a magnetic surface. • Attach Command strips to the back of the logger to mount it a wall or other flat surface. Double up the two Command strips so that they protrude past the magnets. • Use the double-sided tape to affix the logger to a surface. • Insert the hook-and-loop strap through the mounting loops on both sides of the logger to mount it to a curved surface, such as a pipe or tubing."
- Height 0.9 in
- Input Type Internal
- Length 3.34 in
- Logging Modes burst, Fixed interval
- Measurement Type Relative Humidity, Temperature
- Memory Note Approximately 60 seconds; may take longer the further the device is from the logger
- Number of Measurements 2
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -20 °C
- Radio Power 1 mW
- Relative Humidity 1% to 95%
- Relative Humidity Accuracy ± 2% RH
- Response Time Temperature: 7 hrs 30 Min, RH: 20 sec
- Response Time Note Temperature: 7:30 Minutes in air moving 1 m/s, RH: 20 seconds to 90% in airflow of 1 m/s
- Restart Mode Push button
- RH Resolution 0.0001
- RH Sensor Drift <1% Per Year
- Samples,Max 85k Samples, Interval Selectable 1 sec to 18hrs
- Start Modes At set date and time, Button Push, Immediate Start, Next Interval
- Stop Modes Button Push, When Memory is Full, At set date and time, At set Duration
- Supply Power Type Battery
- Temperature Accuracy ± 0.21°C
- Temperature Measurement, Max 70 °C
- Temperature Measurement, Min -20 °C
- Temperature Sensor Drift < 0.1°C Per Year
- Time Accuracy ± 1 minute/month at 25°C
- Transmission Range 30.5 m
- Weight 1.98 oz
- Width 1.44 in
The HOBO MX1101 Temp/RH data logger uses integrated sensors to record temperature and/or relative humidity (RH) in indoor environments. This Bluetooth Low Energy (BLE)-enabled logger is designed for wireless communication with an iOS or Android mobile device.
Using the HOBOmobile app, you can easily configure the logger, read it out, view data on your phone or tablet, export the data, or automatically upload the data to HOBOlink’s free cloud storage, for further analysis. The logger can calculate minimum, maximum, average, and standard deviation statistics and can be configured to trip audible or visual alarms at thresholds you specify. The MX1101 supports burst logging, in which data are logged at a different interval when sensor readings are above or below certain limits. This compact data logger also has a built-in LCD screen to display the current CO temperature, relative humidity, logging status, battery use, memory consumption, and more.
You can download the HOBOmobile app for free for Android devices here and for iOS devices here.
The Hobo MX Gateway (purchased separately) can be used to aggregate the data from up to 100 Hobo MX data loggers directly to a PC via Ethernet or WiFi communications.
Using the HOBOmobile app, you can easily configure the logger, read it out, view data on your phone or tablet, export the data, or automatically upload the data to HOBOlink’s free cloud storage, for further analysis. The logger can calculate minimum, maximum, average, and standard deviation statistics and can be configured to trip audible or visual alarms at thresholds you specify. The MX1101 supports burst logging, in which data are logged at a different interval when sensor readings are above or below certain limits. This compact data logger also has a built-in LCD screen to display the current CO temperature, relative humidity, logging status, battery use, memory consumption, and more.
You can download the HOBOmobile app for free for Android devices here and for iOS devices here.
The Hobo MX Gateway (purchased separately) can be used to aggregate the data from up to 100 Hobo MX data loggers directly to a PC via Ethernet or WiFi communications.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Tracey from
Daily Storage Temperature Log for Audit Purpose
Easy to use. Great product for logging and recording paint storage temperature data for Industrial Painting business.
Date published: 2021-04-02
Can this unit be calibrated "in-house" after being purchased? In other words, does it allow the user to perform calibration and adjustment?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@dwyeromega.com
Date published: 2024-07-08
Does this come with a calibration certificate?
Thank you for your question. It is supplied with a Cal-1 ( Certificate of Conformance).
Date published: 2022-01-13