MX2300-Series

HOBO MX Bluetooth Weatherproof Temperature and Humidity Loggers

0.0

(0)

Models In Stock

Bluetooth Low Energy (BLE) 100-foot communications
Stores: 63,000-83,000 measurements
Accuracy: ± 0.2°C (± 0.4°F) and ± 2.5%RH
Multiple Start & Stop options

See Product Overview

MX2300-Series

From ^$ 136.62

Models In Stock

Shop Models

5 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy Note Temperature Sensor Accuracy: ± 0.25°C from -20° to 0°C, ± 0.2°C from 0° to 70°C
Approvals CE
Battery life 2 yr, typical with reading interval of 1 min
Battery Size and Type 2/3 AA Li-ion
Configuration HOBOmobile® app iOS
Data Interface Bluetooth
Data Interface Note Mobile Device Compatibility : iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later
Enclosure Ratings IP67, NEMA Type 6
Form factor Wall or Flat Surface
Form Factor Note A solar radiation shield is required if the MX2301A or MX2305 logger or the external sensors from an MX2302A, MX2303, or MX2304 logger will be in sunlight at any time.
Height 0.88 in
Length 2 in
Logging Modes burst, Fixed interval
Materials Acetal, Silicone, Stainless Steel
Measurement Range Note Temperature(MX2303,MX2304): -40 to 100°C (-40 to 212°F) with tip and cable immersion in fresh water up to 50°C (122°F) for one year
Measurement Type Temperature
Memory Modes stop when full, Wrap when full
Memory Note Approximately 60 seconds; may take longer the further the device is from the logger
Number of Measurements 1
Operating Temperature, Max 70 °C
Operating Temperature, Min -40 °C
Radio Power 1 mW
Samples,Max 84650 Samples, Interval Selectable 1 sec to 18hrs
Start Modes At set date and time, Button Push, Immediate Start, Next Interval
Stop Modes Button Push, When Memory is Full, At set date and time, At set Duration
Temperature Accuracy ± 0.2 °C
Temperature Measurement, Min -40 °C
Temperature Resolution 0.04 °C
Temperature Sensor Drift < 0.01°C Per Year
Transmission Range 30.5 m
Weight 2.66 oz
Width 4.25 in

The HOBO MX2300 seriesare weatherproof data loggers with built-in temperature and relative humidity sensors. Leveraging Bluetooth Low Energy (BLE) technology, the loggers enable easy, fast setup and data download directly from your mobile device, and provide high-accuracy measurements in harsh outdoor environments.

Using the HOBOmobile app, you can easily configure the logger, read it out, view data on your phone or tablet, export the data, or automatically upload the data to HOBOlink’s free cloud storage, for further analysis. The loggers can calculate minimum, maximum, average, and standard deviation statistics and can be configured to trip visual alarm thresholds. The MX2300 series supports burst logging, in which data are logged at a different interval when sensor readings are above or below certain limits. These loggers also let you maximize battery life with a power-saving mode that uses the Bluetooth signal only when needed.

You can download the HOBOmobile app for free for Android devices here and for iOS devices here.

The Hobo MX Gateway (purchased separately) can be used to aggregate the data from up to 100 Hobo MX data loggers directly to a PC via Ethernet or WiFi communications.

PDFs & Manuals

MX2300-Series_spec MX2300-Series View More

View Less

Compliance