1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
CIR-12
Incoloy Cartridge Heater 0.50 in OD 1.25 to 18 in Long
Models In Stock
CIR-12
From
$
C0.00
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 5 out of
5
by
Syed from
Heat controller
Price worthy. It is working fine and easy to handle.
Date published: 2021-12-21
Hi Are These kind of catridge heaters suitable to work in vacuum chambers?
Thank you for your inquiry. This series of cartridge heaters cannot be used in a vacuum.
Date published: 2024-09-03
1. Which Incoloy alloy is used? 2. Can I use heater CIR-3041/240V to slowly heat lithium chloride to 650 C (MP 605 C) in an insulated alumina crucible in an argon atmosphere? I'll first coat the heater & leads with Saint-Gobain's Cera-Glide BN coating.
Thank you for the inquiry. Please forward this question and application to Temp@Omega.com.
Best regards
OMEGA
Date published: 2023-02-12
Can you please suggest a temperature controller or a thermostat that can be used with these heaters? and can these heaters be used as immersion heaters in an oil bath?
Thank you for your inquiry. We believe the best assistance would come from speaking to us directly at 888-826-6342 ask for the Temperature Department Mon. – Fri. (HOURS 8:30AM - 5:30PM EST).
Date published: 2023-04-25
What is the best way to install these? Is it possible to weld them to a cap?
The Cartridge Heaters are install in drilled out holes with a very tight fit. Guidelines can be sent to you if you request them from heaters@omega.com. Omega does not have any experience with welding these Heaters to offer advice.
Date published: 2023-01-08
Do you recommend using heat transfer paste ?
Omega in general does not recommend heat transfer paste be used as the drilled out hole should be tight with direct metal to metal contact.
Date published: 2023-12-14
How would I go about calculating the wattage required to run this heater at 200 degrees Celsius?
Hi BAT97
Please review our online guide;
https://www.omega.com/en-us/resources/how-calculate-heater-wattage
Best regards
OMEGA
Date published: 2021-04-20
Is there any risk on having two of these touching each other at their ends? We are trying to have two of this stacked vertically inside a tube and was wondering if they can touch each other
Thank you for your inquiry. Heaters should never be in contact with each other except at there wire termination. Contact anywhere else can cause 'hotspots' on either heater which will lead their failure while in process.
Date published: 2023-01-05
RoHS 2015/863 - View Certificate
CE Approved
UL Recognized Component
CSA