Series-CDT

Indoor Air Quality CO2 & Temp Transmitters – Universal Output – LCD Display

(0)

Minimize inventory and save time by combining CO 2 and temperaturemeasurements into one transmitter
Requires minimal maintenance with Automatic Baseline Correction (ABC) to accountfor sensor drif
Reduce operation costs using a low energy, reliable, and repeatable CO 2 sensor
Simplify installation with backplate electrical connection

See Product Overview

Series-CDT

From ^$ 234.70

Shop Models

More Variations Available

See all series options below

Data Sheet

Can't find the right model?

Use our custom configurator to fine tune your product

Product Overview

Carbon Dioxide Accuracy ± 40 PPM + 3% rdg
Carbon Dioxide Concentration, Max 2000 ppm
Carbon Dioxide Concentration, Min 0 ppm
Carbon Dioxide Response Time 120 s (τ90)
Compliance CE
Electrical Output 4 to 20 mA
Measurement Type Carbon Dioxide, Temperature
Operating Temperature, Max 122 °F
Operating Temperature, Min 32 °F
Power Consumption Average: 2 W; Peak: 3.75 W
Relative Humidity 0 to 85% RH Non-Condensing
Sensor Life 15 Years
Supply Power Type AC/DC
Supply Voltage 19 to 28 Vac/16 to 35 Vdc
Temperature Accuracy ± 1 °C
Voltage Output Range 0 to 5 Vdc, 0 to 10 Vdc

The Series CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. In order to achieve a higher level of accuracy, the Series CDT includes barometric pressure adjustment. The CO2 universal output allows users to select the transmitter output to be 4-20 mA, 0-5 VDC, or 0-10 VDC to work with virtually any building management controller.
For applications that require visual indication, the wall mount configurations of the Series CDT can be ordered with an integral LCD display. To prevent tampering, the action of the buttons can be locked out using an internal dip switch selection. The Series CDT CO2 transmitters are available with a -S option that provides the necessary attributes and parameters to be complaint with DSA requirements for monitoring CO2 levels in schools. There is a front facing LED that illuminates when the CO2 level exceeds 1100 PPM.

For models with resistive thermistors or RTD outputs, please see Resistance vs. Temperature Table.