1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
CDTX-2853
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 2 % |
| Accuracy Detail | ±2% of output span |
| Additional Features 1 | 0 to 20 MΩ |
| Applications | Aquatic Life Support, Boilers, Cooling Tower, Deionization, Demineralizer, Waste Management, Water Quality Monitoring |
| Approvals | Manufactured under ISO 9001 for quality and ISO 14001 for environmental management |
| Automatic Solution Recognition | Conductivity values 146.93 μS, 1408.8 μS, 12856 μS [@25°C (77ºF)] (test solutions per ASTM D1125-95) 10 μS, 100 μS, 200 μS, 500 μS, 1000 μS, 5000 μS, 10,000 μS, 50,000 μS, 100,000 μS [@ 25°C (77ºF)] (Standard test solutions) |
| Cell Constant | 1 |
| Conductivity Measurement | 0.055 to 400,000 µS |
| Conductivity Resolution | 0.1% |
| Electrical Output | 4 to 20 mA |
| Enclosure Ratings | IP65, NEMA Type 4X |
| Housing Material | PBT, PVDF |
| Insertion Length | 41.3 mm |
| Loop Resistance, Max | 50Ω at 12 Vdc, 325Ω at 18 Vdc, 600Ω at 24 Vdc |
| Measurement Type | Conductivity |
| Mounting | Junction box for integral mount PBT |
| Relative Humidity | 0 to 95% RH, non condensing |
| Resolution | 7 μA |
| Sensor Break Detection | 22 mA |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -20 °C |
| Supply Power Note | 12 to 24 Vdc ±10%, regulated for 4 to 20 mA output (typically called “loop powered”) |
| Supply Voltage | 12 to 24 Vdc |
| Temperature Compensation | <0.2 °C/ºF |
| Update Rate | Single Channel : <600 ms ; Dual Channel: <1200 m |
| Weight | 0.75 kg |
| Weight Note | NPT Mount Junction Box: 1.75 lb (0.75 kg) Universal Mount: 1.75 lb (0.75 kg) |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
S Steele from
Sensor Cap
This is one of the few conductivity transmitters that I could find with transmitter and probe offered as one unit, AND as a blind configuration (no display.) I have used many of these on various projects, and the configuration jumpers on the transmitter board makes it easy to configure with different cell constants and ranges.
The quarter-turn CAP (top cover) seems to fit a little loose... I have two units installed in an area where there is steam and constant light splashing, so I will see in time of the IP65 rating holds up.
Date published: 2020-06-18
Rated 5 out of
5
by
Dave E from
Start Up Achieved
Availability of this instrument helped our customer out of a situation that could have delayed start up. There was a hiccup due to delivery, but all things considered, we were able to assist our customer on a timely basis.
Date published: 2021-05-13