1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
LR16
Intrinsically Safe Radar Level Transmitter w/NPT Connection
Models In Stock
- Rugged 316L stainless steel antenna and process mount
- Configuration via push button display or HART communicator
- 26 GHz. pulse radar is unaffected by vapor or condensation
- 12” (30cm) dead band enables utilization of the entire tank
LR16
From
$
0.00
Models In Stock
Product Overview
- Accuracy ± 3 mm
- Antenna Diameter 3 in
- Antenna Length 8.94 in
- Approvals CE, RoHS, CRN, FCC
- Approvals Note ATEX IIG Ex ia II C T6...T3 Ga IEC Ex ia IIC T6...T3 Ga CSA Class I, Div 1, Groups A, B, C & D; Class II, Div 1, Groups E, F & G; (T6... T3); Class I Zone 0 AEx ia IIC (T6... T3) Ga & Zone 20 AEx ia IIIC (T76°C to T146°C) Da; Ex ia IIC (T6...T3) Ga & Ex ia IIIC (T76°C to T146°C) Ga
- Bar Graph Percent of Span
- Beam Angle 12°
- Configuration Push Button, HART 7
- Deadband 12 in
- Display and Indications Echo Signal Curve
- Display Measuring Units ft, m
- Display Type LCD
- Electrical Connection 1/2 in NPT
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP67, NEMA Type 6
- Frequency 26 GHz
- Materials 316 Stainless Steel, Polycarbonate
- Measuring Range, Min 1 ft
- Memory Non-Volatile
- Number of Wires 2
- Operating Pressure, Max 150 psi
- Operating Pressure, Min -14.5 psi
- Power Consumption 22.5 mA
- Probe Type 3" Horn Antenna
- Process Connection Size 1 1/2 in
- Process Connection Type NPT Male and Female
- Process Temperature, Max 150 °C
- Process Temperature, Min -60 °C
- Signal fail-safe 3.9 mA, 20.5 mA, 22 mA
- Signal invert 4 to 20 mA, 20 to 4 mA
- Storage Temperature, Max 80 °C
- Storage Temperature, Min -40 °C
- Supply Voltage 21.6 to 26.4 Vdc
- Tank Type Any
- Temperature Compensation Automatic
The intrinsically safe 26 GHz. pulse radar transmitter provides continuous level measurement up to 98.4 (30m) with a 4-20 mA analog and HART digital signal output, and is configured via its integral push button display module or HART communicator. The non-contact liquid level sensor is intended for petroleum, water, wastewater and diluted chemical storage or process conditions in above or below grade tanks of any material. Select this sensor for challenging process conditions with low or non-corrosive media, light surface foam or agitation, higher temperature or pressure, condensation or vapor, and installation in a tank adapter, flange fitting or metal stand-pipe. Typical applications include bulk storage, tanker truck, RO storage, process tank, waste sump and neutralization tanks.
Accessories
Show Ratings & Reviews