Welcome to our new website, found an issue or bug? Please report it here
Series-605
Magnehelic® Transmitter for Low DP Monitoring in HVAC, 4-20 mA Output
Models In Stock
- Easy to read gage permits viewing from far away
- Patented design provides quick response to pressure changes means no delay in signaling and alerting to critical situations
- Durable and rugged housing and high-quality components combined provides long-service life and minimized down-time
- Optional stainless steel bezel is the same installation diameter as Magnehelic® gage and simplifies field upgrade to 605 indicating transmitter
Series-605
From
$
470.75
Models In Stock
Product Overview
- Accuracy Note Electrical: ± 4%, Mechanical: ± 4% (includes linearity, hysteresis, repeatability)
- Compensated Temperature, Max 48.9 °C
- Compensated Temperature, Min 0 °C
- Compliance CE
- Dial Depth 68 mm
- Dial Dia 4 in
- Dial Outer Diameter 127 mm
- Display Type N/A
- Electrical Connection Screw Terminal
- Electrical Output 4 to 20 mA
- Long Term Stability ± 1% FS/year
- Loop Resistance 0 to 1250 Ω max
- Materials, Wetted Consult Factory
- Media Compatibility Air, Argon, Carbon dioxide, Helium, Nitrogen, Non-Conductive Gases, Non-Corrosive Dry Gases
- Mounting Note Vertical Diaphragm
- Operating Temperature, Max 48.9 °C
- Operating Temperature, Min -6.67 °C
- Output Signal Current
- Power Consumption max 38 mA
- Pressure Type Differential
- Process Connection Size 1/8 in
- Process Connection Type NPT Female
- Proof Pressure Up to 10 psi
- Span Adjustment Potentiometers
- Supply Power Type DC
- Supply Voltage 10 to 35 Vdc
- Thermal Effects ± 0.045% FS/°C
- Weight 811 g
- Zero Setting Adjustable Range Protected Potentiometers
The Series 605 Magnehelic® Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system. The easily read dial gage is complimented by the two-wire, 4 to 20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter technology. The two-wire design with terminal strip on the rear simplifies connection in any 4 to 20 mA control loop powered by a 10 to 35 VDC supply.
NIST CALIBRATION available in Product Configurator.
Please see Series AT-605 for ATEX approved.
Product Applications
- Monitor pressures in ducts, rooms, or total building pressures
- Filter monitoring
- Local indication of clean room pressures with process signal sent to control room
PDFs & Manuals
