Welcome to our new website, found an issue or bug? Please report it here
MPCJR-232
Choose a Variant
Data Interface
Output Signal
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.25 % |
| Accuracy Note | ± 0.25% of span, ± 1 least significant digit |
| Compliance | cULus |
| Control Mode | On/Off, Reverse/Direct Acting |
| Current Measurement Range | 4 to 20 mA |
| Data Interface | RS232 Modbus |
| Display Note | Two 4-digit, 7 segment 0.56˝ high LED’s |
| Display Resolution | 1 Count |
| Display Type | LED |
| Enclosure Ratings | IP66, UL Type 4X |
| Impedance | Current: 10 Ω / Voltage: 5 kΩ |
| Input Type | Current, Voltage |
| Isolation | 24 Vdc @ 50 mA, Regulated |
| Memory Backup | Non-Volatile |
| Operating Temperature, Max | 131 °F |
| Operating Temperature, Min | 14 °F |
| Output Signal | None |
| Power Consumption | 7.5 VA |
| Relative Humidity | 0 to 90% Non-Condensing |
| Relative Humidity Note | 14 to 131°F/0 to 90% up to 104°F (40°C) Non-Condensing, 10 to 50% at 131°F (55°C) Non-Condensing |
| Supply Power Note | 100-240 Vac nominal, +10%-15%, 50 to 400 Hz, single phase; 132 to 240 Vdc nominal, +10%-15%. |
| Supply Power Type | AC |
| Supply Voltage | 100 to 240 Vac |
| Switch Note | Control relays: SPDT, rated 10 A @ 240 VAC res.,1/4 hp @ 120 VAC, 1/3 hp @ 240 VAC; Alarm relays: SPST, 3 A @ 240 VAC res., 1/10 hp @ 120 VAC; Others: 15 VDC @ 20 mA for output one and output two. |
| Switch Rating | Control: SPDT, rated 10 A @ 240 Vac,1/4 hp @ 120 Vac, 1/3 hp @ 240 Vac; Alarm: SPST, 3 A @ 240 Vac, 1/10 hp @ 120 Vac; Others: 15 Vdc @ 20 mA for Rone and Rtwo |
| Switch Type | SPDT, SPST |
| Voltage Measurement Range | 0 to 10 Vdc |
| Weight | 16 oz |
| See All Specs | |
Show Ratings & Reviews