Skip to search Skip to main content Skip to navigation

Series-L10

Mini Float Switches for Liquid Control, Brass/Stainless Steel, 1 in NPT

(0)

Long operating life with hermetically sealed, magnetically-actuated SPST reed switch, which is encapsulated in a polypropylene housing
Easily toggle between normally open (NO) or normally closed (NC) with no change in the electrical connection using simple field switch adjustment
Quick and low cost maintenance from easily replaceable switch without affecting installation
Great value and years of reliable liquid level control with top quality materials at a low cost

See Product Overview

Series-L10

From ^$ 179.00

Shop Models

10 Variations available

See all series options below

Can't find the right model?

Use our custom configurator to fine tune your product

Product Overview

Cable Material N/A
Compliance CE, CSA, UR
Electrical Connection Cable
Enclosure Ratings IP66, NEMA Type 4X, Weatherproof
Media Compatibility Alcohols, Compatible Liquids, Oils, Water
Operating Temperature, Max 200 °F
Pressure Type Gauge
Process Connection Size 1/8 in
Process Connection Type NPT Male
Switch Note 1.5 A @ 24 Vdc res., 0.001 A @ 200 Vdc res., 0.5 A @ 120 Vac
Switch Rating 30 VA: 0.14 A @ 220 Vac
Switch Type SPST NO/NC
Weight 10 oz
Wire Gauge 18 AWG

The Series L10 Flotect® Mini-Size Float Switches combine low cost with top quality materials and construction for great value and years of reliable liquid level control. Wide media compatibility is assured with a choice of brass or stainless steel bodies and external tees; polypropylene or SS floats. Two basic configurations are offered; with 1" NPT male threads for direct side mounting through a half coupling or with factory installed tee for external mounting.

All Series L10 controls feature a hermetically sealed, magnetically actuated SPST reed switch which is encapsulated in a polypropylene housing. Units are quickly and easily adjusted for your choice of normally open or normally closed operation thanks to a unique design. Just loosen two screws and instantly slide the switch assembly to the action required. N.O. and N.C. markings are clearly visible. This feature also speeds switch replacement if damage occurs.

Three types of floats are offered to accommodate liquids with specific gravities as low as 0.5; maximum pressures to 2000 psig (137.8 bar). Wire leads are 22 AWG X 18" (460 mm) and exit the switch assembly through 1/8" male NPT threads. These controls are UL recognized and CSA listed.

California Residents: Click Here for Proposition 65 WARNING.