Welcome to our new website, found an issue or bug? Please report it here
LCGB
Miniature Button Compression Load Cell with Through Holes
Models In Stock
- 5-Point Calibration with 59 kOhm Shunt Cal Data Included
- Stainless Steel
- High Accuracy
- Low Profile
LCGB
From
$
665.50
Models In Stock
Product Overview
- 5-Point Calibration 0%, 50%, 100%, 50%, 0%
- Bridge Resistance 350 Ω
- Cable Length 5 ft
- Calibration Option 5 POINT NIST
- Electrical Connection Cable
- Electrical Output 2 mV/V
- Enclosure Ratings IP54
- Force Type Compression
- Full Scale Deflection 0.003 in
- Hysteresis ± 0.20%
- Linearity ± 0.25%
- Load Cell Type Through Hole
- Materials Stainless Steel
- Operating Temperature, Max 121 °C
- Operating Temperature, Min -54 °C
- Overload, Max 300% FS
- Process Temperature, Max 71 °C
- Process Temperature, Min 16 °C
- Repeatability ± 0.10%
- Safe Overload 150% FS
- Supply Voltage 10 Vdc
- Thermal Span Effect ± 0.018% rdg/°C
- Thermal Zero Effect ± 0.009% FSO/°C
- Wiring/Connector Table Red: (+) Excitation; Black: (-) Excitation; Green: (-) Output; White: (+) Output
- Zero/Balance Error ± 2%
The LCGB Series comprises miniature low-profile compression load cells with excellent long-term stability. An all stainless steel construction ensures reliability in harsh industrial environments. These cells are designed to be mounted on a flat surface using cap screws to secure them to the base. A load button is integral to their basic construction for even force distribution.
Show Ratings & Reviews
Rated 5 out of
5
by
DaveCT from
high quality, reliable, easy to use
I needed a good load-cell fast to re-qualifiy a press that had our manufacturing stopped. This load-cell was the answer. OMEGA had the gear at my door 7:30AM next day, and I had high confidence measuements 8AM. Great product. Great Customer Support. Fantastic experience
Date published: 2016-12-06
Rated 5 out of
5
by
Chris Choi from
good thing about LCGB-5K
all-stainless steel, high accuracy with a linearity of ±0.25% Full Scale Output, load cell operates with a 10 VDC provides a 2 mV/V, temperature range, typically from -54 to 121°C (-65 to 250°F).
Date published: 2024-11-13
Hi, I'm using the LCGB-30k in a pilot-calender and need to re-design the force measurement. Does this sensor designed deform in force-direction when force is applied? Or can it be seen as static?
A slight deformation of the load will occur. At full load (30,000 lbf) nominal deflection is 0.003"
Date published: 2022-12-14
I will need a digital read out for this load cell. Which read out would be my best option. Thanks
We offer several digital readouts that are compatible with this load cell.
https://www.omega.com/en-us/control-monitoring/meters/c/strain-meters
Date published: 2021-08-25
I am interested in using this load cell to measure the force being applied by different rocket engines sizings for a club at my school and was wondering what is the minimum force that can be measured by this load cell?
This load cell is a mechanical device and should provide an output at any force it sees.
Date published: 2022-03-23
Will the 30,000 lbf model retain its measurement accuracy at lower applied forces of about 1000 lbf?
Generally the load will not be as accurate in the lower 10% of its range.
Date published: 2023-02-11
Would the 50,000 lbf model be able to measure a very small force such as 10lbf or would it not sense it because it is built for larger forces?
Thank you for your inquiry, if 10lbf is the range that you would like to monitor we would recommend that you use a load cell that is closer to that range.
Date published: 2022-03-31
What is the size (diameter) of the wire that the 30,000 lbf model uses?
Thank you for your inquire
mm (inch)
4.83 (0.190)
Date published: 2023-01-18
Is this load cell capable of handling an alternating current? If supplied with an alternating current, is it expected for the output signal to fluctuate with the excitation voltage?
Yes they will run on a low voltage AC signal (nominal 10V, 15V max). Your instrumentation you are reading the output signal with also have to be able to read the low level 20 mV AC signal that the load cell would output
Date published: 2020-11-11