1-800-663-4209 | Vos commentaires sont importants, répondez à un sondage rapide commentaires sur le site web
MTA-BRLK-SSLK-RA-RB-Series
OMEGALOK Adaptors, Fittings & Bushings
Modèles en stock
- Standard Dimension Adaptors and Reducing Bushings
- Ferrule Design for Positive Pressure Seal
- Convert NPT Thread to BSPP or BSPT Thread or Vice Versa
- Rugged Designs
MTA-BRLK-SSLK-RA-RB-Series
Depuis
$
7.27
Modèles en stock
L'aperçu du produit
- Diameter 0 mm
- Mounting Orientation Straight
- Process Connection Type Compression Fitting
Standard Dimension Adaptors and Reducing Bushings Rugged Design Available in Stainless Steel, Brass, or Carbon Steel Reduce Down to 1⁄8 NPT Adapt Up to 1 NPT
Compression Fittings Ferrule Design for Positive Pressure Seal Heavy Duty Construction in Stainless Steel or Brass For Protection Tube Diameters 1⁄16" up to 1⁄2“ Metric Models are available for Metric Probes and Protection Tubes
Convert Imperial and Metric Threads Convert NPT Thread to BSPP Thread Convert NPT Thread to BSPT Thread Convert BSPP Thread to NPT Thread Convert BSPT Thread to NPT Thread Brass or Stainless Steel Models Compression Fittings for Metric Diameters Compression Fittings with Metric Threads
Compression Fittings
Convert Imperial and Metric Threads
PDF et manuels
Afficher les notes et les avis
What pressure will these compression fittings hold with a sheet type thermocouple
Omega does not put a pressure rating on these fittings because there are many variables like tube wall thickness and temperature. You would need to send the exact part numbers to temp@omega.com to review but certainly a few hundred PSI can be expected.
Date published: 2022-10-26
Is Item# SSLK-14-18 bored through the same as Item# SSLK-14-14?
Yes the first 14 is for the size of the tube accepted in this cases 0.25". The second number is for the NPT thread on the fitting.
Date published: 2023-12-01
What is the operational and burst pressure rating of the BRLK-18-14, 1/8 x 1/4 compression fitting, PCJOB02818, 1806, Zone L, Brass?
No data available. It is dependent on the probe used in application.
Date published: 2022-01-24
what grade of brass do you use to manufacture MTA3-1/4-1/4-BR Model
This question will require addition effort so please send your request to temp@omega.com for follow up.
Date published: 2022-10-03
Is the OmegaLok adapter Item# SSLK-14-14, 1/4" all the way through or is there a stop?
Thank you for your inquiry. This compression fitting is designed to accept a 1/4" diameter probe with no stop and opening is all the way through for probe insertion into a process.
Date published: 2021-09-28
What is the thru hole diameter of the 1/8NPT to 6mm compression fitting? We are trying to use for a 5mm probe that has a 6mm collar for the fitting (need the 5mm diameter to go through the fitting). What is the rated pressure of the fitting?
The SSLK-M60-18 has an opening to accept a 6mm diameter tube. Omega cannot make a recommendation for any other diameter and does not place a pressure rating either.
Date published: 2022-09-20
Can this fitting be used to insert a 0.25 inch metal tube into a larger polycarbonate tube?
Thank you for your inquiry, Yes this fitting will except a 0.25 inch metal tube
Date published: 2023-01-27