Welcome to our new website, found an issue or bug? Please report it here
CYC325
Dual Channel Autotune Temperature Controllers
Choose a Variant
Thermocouple Type
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $8,155.98 |
| 5-9 | $7,748.18 |
| 10-24 | $7,585.06 |
| 25-49 | $7,258.82 |
| 50-99 | $7,095.70 |
| 100+ | $6,932.58 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| A/D Conversion | 24-bit |
| Accuracy | Selectable |
| Accuracy Note | PTC RTD (0 to 500 Ω : Range) : ± 0.004 Ω, ± 0.01 % of rdg PTC RTD (0 to 5000 Ω : Range) : ± 0.004 Ω, ± 0.02 % of rdg NTC RTD (0 to 7500 Ω : Range) : ± 0.1 Ω, ± 0.04 % of rdg Thermocouple (± 25 mV) : ± 1 µV,± 0.05 % of rdg Thermocouple (± 50 mV) : ± 1 µV,± 0.05 % of rdg |
| Approvals | CE Mark |
| Baud Rate | 9600 to 57600 |
| Control Characteristics | PID Control Settings:
Manual Output: 0 to 100% with 0.01% setting resolution Zone Control: 10 temperature zones with P, I, D, manual heater out, and heater range Setpoint Ramping: 0.1 K/min to 100 K/min Safety Limits: Curve temperature, power up heater off, short circuit protection |
| Control Output | Heater |
| Control Type | Manual Heater Output, Open Loop, PID Control |
| Data Interface | RS232 |
| Digital Connector Type | 9 pin Sub-D |
| Display Annunciators | Autotune, Control input, Remote |
| Display Measuring Units | °C, K, mV, V |
| Display Size | 5.5 mm Digits |
| Display Type | LCD |
| Display Type Note | Display: 2-line, 20-character, liquid crystal display with 5.5 mm (0.216”) character height Display Update Rate: 2 rdg/s Other Displays: Setpoint, heater range, and heater output; user selected |
| Electrical Connection | Ceramic Isothermal Block |
| Filter | Averages 2 to 64 input readings |
| Form factor | Benchtop |
| Front Panel Display Readings | 1 to 4 |
| Heater Output Display | Percentage of full power or current |
| Heater Output Resolution | 0.01 |
| Height | 89 mm |
| Input Type | Thermocouple, RTD, Thermistor |
| Input Type Note | Temperature, sensor units Input Configuration: Each input is factory configured for either diode/RTD or thermocouple |
| Interface Features | IEEE-488 Interface Features: SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT0, C0, E1 |
| Isolation | Sensor inputs optically isolated from other circuits but not each other |
| Keypad | 20-key membrane, numeric and specific functions |
| Length | 368 mm |
| Loops | Control Loops : 2 |
| Measurement Type | Temperature |
| Number of Control Outputs | 2 |
| Number of Inputs | 2 |
| Operating Temperature, Max | 35 °C |
| Operating Temperature, Min | 15 °C |
| Output Detail | 2 Heater output |
| Output Signal | None |
| Power Consumption | 6 W |
| RTD Type | 4-lead differential With 6-Pin DIN Connector |
| Resolution | Sensor dependent, refer to input specifications table |
| Sampling Rate | 10 Hz (10 updates/second) |
| Sampling Rate Note | To 10 rdg/s on each input |
| Sensor Input Configuration | Measurement Type: 4-lead differential Excitation: Constant current with current reversal for RTDs Supported Sensors: Diodes, silicon, GaAlAs; RTDs, 100 Ω Platinum, 1000 Ω Platinum, germanium, carbon-glass, CernoxTM, and RoxTM Standard Curves: CY7 and CY670, PT-100, PT-1000, RX-102A, RX-202A Input Connector: 6-pin DIN |
| Sensor Units Display Resolution | Sensor dependent up to 5 digits |
| Setpoint Setting Resolution | Same as display resolution (actual resolution is sensor dependent) |
| Settable Parameters | Curve Entry, Keypad Lock-out |
| Software Support | LabVIEWTM driver; consult factory for availability |
| Supply Power Note | Standard 120 Vac, optional 240 Vac, 6%, -10%, 50 or 60 Hz, 85 VA |
| Supply Power Type | AC |
| Supply Voltage | 100 to 240 Vac |
| Temp Display Resolution | 0.001° from 0 to 99.999°, 0.01° from 100 to 999.99°, 0.1° above 1000° |
| Thermocouple Type | E, K, T, AuFe 0.07% vs Cr, AuFe 0.03% vs Cr |
| Tuning | Autotune, PID, PID zones |
| Update Rate, Max | 10 rdg/s on each input (except 5 rdg/s on input A when configured as thermocouple) |
| Weight | 4 kg |
| Width | 216 mm |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews