Welcome to our new website, found an issue or bug? Please report it here
DRSL-SP2
Choose a Variant
Input Type
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $288.76 |
| 5-9 | $274.32 |
| 10-24 | $268.55 |
| 25-49 | $257.00 |
| 50-99 | $251.22 |
| 100+ | $245.45 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.05 % |
| Additional Features 1 | Splitter |
| Approvals | CE, UL, RoHS |
| Calibration Temperature, Max | 28 °C |
| Calibration Temperature, Min | 20 °C |
| Current Measurement Range | 0 to 20.5 mA |
| EMC Immunity Note | Extended EMC Immunity NAMUR NE 21, A Criterion, Burst: <±1% of span |
| EMC Standard | NAMUR NE 21 |
| Electrical Output | 0 to 20.5 mA |
| Enclosure Ratings | IP20 |
| Height | 113 mm |
| Input Range Note | Current Input:;Programmable Measurement Ranges: 0 to 20 mA and 4 to 20 mA; Input Voltage Drop: <1.5V; 2-Wire Transmitter Supply:>17V/20 mA;Voltage Input:;Functional Range: 0 to 11.5V/0 to 5.75V; Programmable Measurement Ranges: 0 to 5V, 1 to 5V, 0 to 10V,2 to 10V ; Input Resistance: ≥500 kΩ |
| Input Type | Voltage, Current |
| Installation | Pollution degree 2 and measurement/overvoltage category II |
| Isolation | Isolation: Input/output 1/output 2/supply;Isolation Voltage (Test): 2.5 kVac;Isolation Voltage (Working):300 Vac |
| Length | 115 mm |
| Load Resistance | Current Output : 23 mA/300 Ω max;Voltage Output : >10 kΩ min |
| Mounting | DIN Rail 35 mm Standard, EN 60715 |
| Noise Calibration | >60 dB |
| Number of Inputs | 2 |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -25 °C |
| Output Detail | Current Output: Programmable Signal Ranges:0 to 20 mA and 4 to 20 mA Current Limit: ≤28 mA Voltage Output: Programmable Signal Ranges:0 to 10, 2 to 10, 0 to 5 and 1 to 5V |
| Output Signal | Current, Voltage |
| Output Value | Splitter |
| Power Consumption | 1.2 W, Internal - max 0.65 W |
| Relative Humidity | 0 to 95% RH (non-condensing) |
| Response Time | < 7 ms |
| Response Time Note | Response Time (0 to 90%, 100 to 10%): <7 ms |
| Screw Terminal Torque | 0.5 Nm |
| Span, Max | Corresponds to the presently selected DIP switch output range |
| Stability | Load Stability: ≤0.01% of span/100 Ω |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Note | 16.8 to 31.2 Vdc via power rail or connectors |
| Supply Power Type | DC |
| Supply Voltage | 16.8 to 31.2 Vdc |
| Temperature Coefficient | <±0.01% of span/°C |
| Voltage Loss | <1.5 V |
| Voltage Measurement Range | 0 to 10.25 Vdc |
| Voltage Output Range | 0 to 10 Vdc |
| Weight | 70 g |
| Width | 6.1 mm |
| Wire Gauge | 26 to 12 AWG |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
AverageBrain from
Not Hard to Implement
I was worried by the other review, but after reading the manual and wiring diagram it did not seem too complex to me. Implemented it in a retrofit, buying another one now. They work great and are not hard. Anyone with electrical literacy will be fine.
Date published: 2023-06-08
Rated 1 out of
5
by
Nickname for what from
Worst possible instructions
I defy anyone to wire this without outside help. The manual is a translation where every key word was left out.
Date published: 2016-07-21