Welcome to our new website, found an issue or bug? Please report it here
FDT500-Series
Battery and DC Powered Flange Mount Ultrasonic Flow Meter
- Economical Ultrasonic Flow Meter for Water Service
- Battery Powered
- Displays Flow Rate and Total
- 4 to 20 mA Current output standard (DC Power required)
FDT500-Series
From
$
2,983.40
Product Overview
- Accuracy ± 2 %, ± 5% with transitional flow
- Accuracy Note ±2% of reading; ±5% below minimum transition rate
- Calibration Option 3 POINT NIST
- Certifications CE
- Display Note 7-segment, 8-digit, single-line LCD
- Display Type LCD
- Enclosure Ratings IP68
- Form factor 150 ANSI Flange
- Materials Cast Iron, ABS
- Materials, Wetted cast iron
- Measurement Type Transit Time
- Number of Digits 8
- Number of Outputs 1
- Pressure, Max 230 psi
- Process Temperature, Max 50 °C
- Process Temperature, Min 0 °C
The FDT500 Series comprises advanced-technology water flow meters. This series uses transittime ultrasonic technology in which the signal is transmitted and received alternately between 2 flow sensors and the “time of flight†determines the flow rate. The battery-powered transmitter comes in the user’s choice of an integrally mounted display or a remotemount version. Applications include both commercial and consumable water measurement. Long-term stability and a wide measurement range make it possible not only to measure water consumption, but also to monitor systems for water leakage. Because the FDT500 Series has no moving parts, system pressure loss is minimal and filtration is not required. Display flow rate or total at the push of a button. Installation is aided by 150-lb ANSI flanges in sizes from 2 to 8" or 32 to 200 DN.
Specifications
Accuracy: ±2% of reading; ±5% below minimum transition rate
Fluid Temperature: 0 to 50°C (32 to 122°F) For integral model. 0 to 90°C (32 to 190°F) For remote model.
Maximum Pressure: 230 psig
Enclosure: IP68 Electronic Housing: Aluminum alloy with plastic cover
Display: 7-segment, 8-digit, single-line LCD
Current Output: 4 to 20 mA/DC current (requires 8 to 24 Vdc supply)
Open Collector Output: 5 to 30 Vdc, 1 mA maximum
Flange: ANSI 150# or DIN
Meter Body: Cast iron
Power Supply: Internal 3.6V battery (included), 6 to 8 year life
Specifications
Accuracy: ±2% of reading; ±5% below minimum transition rate
Fluid Temperature: 0 to 50°C (32 to 122°F) For integral model. 0 to 90°C (32 to 190°F) For remote model.
Maximum Pressure: 230 psig
Enclosure: IP68 Electronic Housing: Aluminum alloy with plastic cover
Display: 7-segment, 8-digit, single-line LCD
Current Output: 4 to 20 mA/DC current (requires 8 to 24 Vdc supply)
Open Collector Output: 5 to 30 Vdc, 1 mA maximum
Flange: ANSI 150# or DIN
Meter Body: Cast iron
Power Supply: Internal 3.6V battery (included), 6 to 8 year life
PDFs & Manuals
Show Ratings & Reviews
Can the meter screen be flipped upside down so that we can read it? Our pipe setup for our lab has the direction of flow going from right to left so that when the meter is installed, the screen is upside down and can't easily be read.
Thank you for your inquiry! Unfortunately, the meter screen is not designed to be flipped in order to change orientation and should not be tampered with in this manner.
Date published: 2021-08-24
How do I change the battery? We have had the unit for almost a year but have never used it. Is there a tab or something to remove before use?
Thank you for your inquiry. In the manual, Section 6.3, has the information about the battery, battery life, and instructions on how to replace the battery. Here is the web link to obtain the manual https://www.omega.com/en-us/pdf-manuals and click on the E-G and then, scroll down to look for the general part number.
Date published: 2020-12-04
When connected to Vdc does this product still require the battery.
Thanks for your question. Yes. The meter still requires the battery when connected to VDC voltage supply.
Date published: 2023-06-12