Welcome to our new website, found an issue or bug? Please report it here
FLCN101
Flow/No Flow Single Sensor Controller With Strobe Alert
- Calls Immediate Attention to Alarm Conditions
- High Intensity Strobe Light Reduces Operator Error
- Adjustable Time Delay Relay
- Controls Pumps, Valves and Alarms
Product Overview
- Additional Features 1 300° swivel base
- Approvals CE
- Approvals Note CE compliance: EN 61326 EMC EN 61010‐1 Safety
- Diameter 2.8 in
- Electrical Connection 1/2 in NPT female Conduit with Screw Terminal block
- Enclosure Ratings IP65, NEMA 4
- Height 6.4 in
- Materials Polypropylene
- Media Compatibility Gases, Liquids
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -40 °C
- Power Consumption 5 W
- Process Connection Size 3/4 in
- Process Connection Type NPT Female
- Sensor/Transmitter Power 13.5 Vdc @100 mA
- Supply Power Note 120/240 Vac, 50/60 Hz
- Supply Voltage 120/240 Vac
- Switch Rating 10 A
- Switch Rating Note SPDT Relay, Form C, 10A, 120 Vdc or 240 Vac
- Time Delay 0.15 to 60 sec
OMEGA’s flow alert calls attention to alarm conditions. For operator alert to low flow conditions, the flow alert offers an excellent solution to this problem. An amber lens distributes the high intensity strobe light in a pattern which calls immediate attention to alarm conditions. The visual alert combined with a controller makes it both cost effective and easy to install.
SPECIFICATIONS
Voltage Input: Selectable, 120 or 240 Vac, 50 to 60 Hz
Max Consumption: 5 watts
Lighting Element: High intensity lamp
Brightness: Greater than 50,000 CP
Relay Output: Isolated and sealed single pole double throw (SPDT) relay, Form C
Switching Mode: Selectable, NO or NC states
Max. Relay Switching Voltage: 120 Vdc or 240 Vac
Max. Switched Current: 10 amps
Time Delay: Adjustable from 0.15 to 60 seconds
Strobe Type: Xenotube
Strobe Flash: 1 per second
Max. Temp. Rating: 70°C (158°F)
Sensor Voltage Supply: 13.5 Vdc @100 mA
Mounting Connection: 3/4 NPT
Conduit Connection: 1/2 NPT
Enclosure Rating: NEMA-4X (IP65)
Enclosure Material: Polypropylene (PP), flame retardant
Dimensions: 7.1 D x 16.2 cm H (2.8 x 6.4') x 3/4 NPT
SPECIFICATIONS
Voltage Input: Selectable, 120 or 240 Vac, 50 to 60 Hz
Max Consumption: 5 watts
Lighting Element: High intensity lamp
Brightness: Greater than 50,000 CP
Relay Output: Isolated and sealed single pole double throw (SPDT) relay, Form C
Switching Mode: Selectable, NO or NC states
Max. Relay Switching Voltage: 120 Vdc or 240 Vac
Max. Switched Current: 10 amps
Time Delay: Adjustable from 0.15 to 60 seconds
Strobe Type: Xenotube
Strobe Flash: 1 per second
Max. Temp. Rating: 70°C (158°F)
Sensor Voltage Supply: 13.5 Vdc @100 mA
Mounting Connection: 3/4 NPT
Conduit Connection: 1/2 NPT
Enclosure Rating: NEMA-4X (IP65)
Enclosure Material: Polypropylene (PP), flame retardant
Dimensions: 7.1 D x 16.2 cm H (2.8 x 6.4') x 3/4 NPT
