FPB100-Series

General Purpose Paddlewheel Flow Meter

0.0

(0)

Models In Stock

4 to 20 mA and Programmable Switch/Pulse Divider Output
Low Flow Capabilities from 0.1m/s (0.3 ft/s)
Polypropylene or PVDF Material
Installs into Pipe Sizes DN 15 to DN 200 (0.5 to 8')

See Product Overview

FPB100-Series

From ^$ 721.34

Models In Stock

Shop Models

5 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ± 1 %
Approvals CE
Cable Length 1000 ft
Circuit Protection Up to 40V for 1 hour
Compatible Connectors FP-5300 Sensor Installation Fittings
Electrical Output Pulse Divider, SPDT Relay
Enclosure Ratings IP65, NEMA Type 4X
Frequency Input Range 1 to 1000 Hz
Linearity Error ±1%
Linearity Note ±1% of max range at 25°C
Media Compatibility Liquids
Operating Pressure, Min 0 psi
Operating Temperature, Max 85 °C
Operating Temperature, Min -18 °C
Over-Voltage Protection >40 Vdc over 1 hour
Pressure Type Gauge
Process Temperature, Max 65 °C
Process Temperature, Min 0 °C
Relative Humidity 0 to 90% RH, non-condensing
Repeatability Error ±0.5%
Repeatability Note ±0.5% of max range at 25°C
Response Time 100 ms
Storage Temperature, Max 75 °C
Storage Temperature, Min -10 °C
Velocity, Max 6 m/s
Velocity, Min 0.1 m/s
Weight 0 kg

Description

The OMEGAâ„¢ FPB100 Series flow sensor is the next generation in fluid measurement technology.This new sensor is an improvement on what is already an industry standard. It has the addedfunctionality of various output options including flow switch, multi-functional pulse divider or4 to 20 mA. Additionally, it offers low flow, low power and high resolution and can be configuredonsite directly through the built-in user interface. Installation is simple because the OMEGA FPB100Series utilizes the same fittings as the popular OMEGA FP5000 and FP8500 Series paddlewheelsensors and fits into pipe sizes ranging from DN15 to DN200 (0.5 to 8"). Available in polypropylene and PVDF, it is ideal for a variety of applications including chemical processing, water and wastewater monitoring and scrubber control.

SPECIFICATIONS
General
Input Frequency Range: 1 to 1000 Hz
Operating Range: 0.1 m/s to 6 m/s (0.3 ft/s to 20 ft/s)
Linearity: Â±1% of max range at 25Â°C (77Â°F)
Repeatability: Â±0.5% of max range at 25Â°C (77Â°F)
System Response: 100 ms update rate nominal

Wetted Materials
Sensor Body: Polypropylene or PVDF (depending on model)
O-Ring: FPM
Rotor Pin:
   Titanium: Polypropylene models
   PVDF: PVDF models
Rotor:
   Black PVDF: Polypropylene models
   Natural PVDF: PVDF models

Electrical
Pulse, Flow Switch
   Dry-Contact Relay: 24 Vdc nominal (21.6 Vdc min to 26.4 Vdc max) 30 mA max current
   Solid-State Relay: 5 to 24 Vdc nominal (5.0 Vdc min to 26.4 Vdc max) 30 mA max current
   4 to 20 mA: 12 Vdc to 32 Vdc nominal (10.8 Vdc min to 35.2 Vdc max) 21 mA max current
Reverse Polarity and Short Circuit Protection: Up to 40V, 1 hour
Over-Voltage Protection: >40 Vdc over 1 hour

OUTPUT SPECIFICATIONS
Signal Averaging: Programmable 0 to 100 seconds
Sensitivity Response: Programmable 0 to 9 scale

PULSE DIVIDER/TOTAL PULSE OUTPUT
Pulse Divider Setting: 1.0000 to 99999
Maximum Pulse Rate: 300 Hz
Maximum Pulse Width: 50 ms

FLOW SWITCH OUTPUT
Relay Modes: Low, high
Time Delay: 0.0 to 6400.0 seconds
Hysteresis: Adjustable in engineering units
Relay Specifications
   Mechanical SPDT: 5 A at 30 Vdc, 5 A @ 250 Vac
   Solid-State Relay: 100 mA at 40 Vdc, 70 mA @ 33 Vac
Current Output (Passive 4 to 20 mA)
Loop Accuracy: Â±32 ÂµA (at 25Â°C at 24 Vdc)
Loop Resolution: 5 ÂµA
Temp. Drift: Â±1 ÂµA per Â°C max
Power Supply Rejection: Â±1 ÂµA per V
Max Cable: 300 m (1000')
Maximum Loop Resistance: 600 Î© @ 24 Vdc 1kÎ© @ 32 Vdc
Max Temperature/Pressure Rating
Storage Temperature: -10 to 75Â°C (14 to 167Â°F)
Operating Temperature: 0 to 65Â°C (32 to 149Â°F)
Relative Humidity: 0 to 90% RH, non-condensing
Flow Sensor
   PP: 12.5 bar @ 20Â°C, 1.7 bar @ 85Â°C (180 psi @ 68Â°F, 25 psi @185Â°F)
   PVDF: 14 bar @ 20Â°C, 1.7 bar @ 85Â°C (200 psi @ 68Â°F, 25 psi @ 185Â°F)
Operating Temperature:
   PP: -18 to 85Â°C (0 to 185Â°F)
   PVDF: -18 to 85Â°C (0 to 185Â°F)
Standards and Approvals: NEMA 4X (IP65) enclosure CE approval

PDFs & Manuals

FPB100_spec FPB100-Series View More

View Less

Compliance