1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
PTC-1A
Choose a Variant
Supply Voltage
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $242.94 |
| 10-24 | $230.79 |
| 25-49 | $218.65 |
| 50-99 | $206.50 |
| 100-499 | $194.35 |
| 500+ | $182.21 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 20 ms or ± 0.5 % of set time |
| Contact Rating | SPDT relay, rated 7 A at 30 Vdc/240 Vac resistive |
| Cutout Dimensions | 45 x 45 mm |
| Display Type | 3 Digit Display |
| Electrical Life | 200,000 operations at rated load |
| Form factor | 1/16 DIN |
| Frequency | 47 to 440 Hz |
| Height | 48 mm |
| Isolation | 1500 Vac 50 Hz |
| Length | 89 mm |
| Mechanical Life | 10 million operations |
| Number of Relays | 1 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Power Consumption | 1 W |
| Reset | 10 ms |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -20 °C |
| Supply Power Type | AC/DC |
| Supply Voltage | 18 to 264 Vac/Vdc |
| Timer Range | 0.1 to 9.99 sec, 0.1 to 99.9 sec, 0.01 to 9.99 min, 0.1 to 99.9 min, 0.01 to 9.99 hrs, 0.1 to 9.99 hrs |
| Width | 48 mm |
| See All Specs | |
Show Ratings & Reviews
Rated 3 out of
5
by
ControlFreq from
Easy To Use Pay Attention To Review
This was easy to setup, but there are a few challenges. Do not use this in conjunction with an LED indicator. An LED indicator will cause the trigger circuit to instantly trigger, prior to the trigger input. Also when updating the time, the new programmed time will not display until either the completion of the next timing event, or a power cycle. When using in a panel mount application, I recommend wrapping the plastic clips with TyWraps to keep the latches tight against the relay. The PTC-1A shipped with the relay, the octal base with terminal points/screws, and the panel mount hardware. This is everything required to mount to a Panel face, or a backplane by screwing the base down.
Date published: 2019-05-01